Brocade Silkworm 200E 16 port 4GB Fibre Channel Switch This switch is in good condition, but does have a few small scratches. It was pulled from a working environment.
The password was reset to the default password, and this is ready to be setup and used.
Pictures shown are actual pictures of the item you will be getting. See below for config (I blocked out some serial information)
The system is coming up, please wait...
Read board ID of 0x80 from addr 0x23
Read extended model ID of 0x19 from addr 0x22
Matched board/model ID to platform index 6
Read board ID of 0x80 from addr 0x23
Read extended model ID of 0x19 from addr 0x22
Matched board/model ID to platform index 6
Checking system RAM - press any key to stop test
Checking memory address: 00100000
System RAM test using Default POST RAM Test succeeded.
Press escape within 4 seconds to enter boot interface.
Booting "Fabric Operating System" image.
Entry point at 0x01000000 ...
Linux/PPC load:
BootROM command line: quiet
Uncompressing Linux...done.
Now booting the kernel
Attempting to find a root file system on hda1...
modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.19/modules.dep (No such file or directory)
INIT: version 2.78 booting
INIT: Entering runlevel: 3
INITCP: CPLD Vers: 0x90 Image ID: 0x1c
Fabric OS (SW200E2)
SW200E2 console login: uptime: 12737; sysc_qid: 0
2020/08/02-05:43:39, [HAM-1004], 220,, INFO, SilkWorm200E, Processor rebooted - Unknown
SNMP Research SNMP Agent Resident Module Version 15.3.1.4
Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 SNMP Research, Inc.
sysctrld: all services Standby
sysctrld: all services Active
POST1: Started running Sun Aug 2 05:43:49 GMT 2020
POST1: Test #1 - Running turboramtest
POST1: Test #2 - Running portregtest
POST1: Script PASSED with exit status of 0 Sun Aug 2 05:43:51 GMT 2020 took (0:0:2)
POST2: Started running Sun Aug 2 05:43:51 GMT 2020
POST2: Test #1 - Running portloopbacktest (TXRX INTERNAL)
POST2: Test #2 - Running minicycle (TXRX INTERNAL)
POST2: Running diagshow
POST2: Script PASSED with exit status of 0 Sun Aug 2 05:44:06 GMT 2020 took (0:0:15)
2020/08/02-05:44:07, [BL-1000], 221,, INFO, SW20Enabling switch...
0E2, Initializing Ports...
2020/08/02-05:44:07, [BL-1001], 222,, INFO, SW200E2, Port Initialization Completed
Fabric OS (SW200E2)
SW200E2 login: admin
Password:
Please change your passwords now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
SW200E2:admin> diagshow
Diagnostics Status: Sun Aug 02 06:33:09 2020
Slot: 0 UPORTS
Port BPort Diag Active Speed FrTX FrRX LLI Errs Loopback
0/0 0 OK DN 4G Auto -- -- --
0/1 1 OK DN 4G Auto -- -- --
0/2 2 OK DN 4G Auto -- -- --
0/3 3 OK DN 4G Auto -- -- --
0/4 4 OK DN 4G Auto -- -- --
0/5 5 OK DN 4G Auto -- -- --
0/6 6 OK DN 4G Auto -- -- --
0/7 7 OK DN 4G Auto -- -- --
0/8 8 OK DN 4G Auto -- -- --
0/9 9 OK DN 4G Auto -- -- --
0/10 10 OK DN 4G Auto -- -- --
0/11 11 OK DN 4G Auto -- -- --
0/12 12 OK DN 4G Auto -- -- --
0/13 13 OK DN 4G Auto -- -- --
0/14 14 OK DN 4G Auto -- -- --
0/15 15 OK DN 4G Auto -- -- --
Central Memory: OK
Total Diag Frames Tx: 336
Total Diag Frames Rx: 336
SW200E2:admin> licenseshow
xxxxxxxxxxxxxxxx:
Web license
xxxxxxxxxxxxxxxx:
Zoning license
SW200E2:admin> sensorshow
sensor 1: (Temperature ) is Ok, value is 21 C
sensor 2: (Temperature ) is Ok, value is 22 C
sensor 3: (Fan ) is Ok
sensor 4: (Fan ) is Ok
sensor 5: (Fan ) is Ok
sensor 6: (Power Supply) is Ok
SW200E2:admin> sfpshow
Area 0: --
Area 1: --
Area 2: --
Area 3: --
Area 4: --
Area 5: --
Area 6: --
Area 7: --
Area 8: --
Area 9: --
Area 10: --
Area 11: --
Area 12: --
Area 13: --
Area 14: --
Area 15: --
SW200E2:admin> Returns This item is guaranteed to be as described and covered by the Money Back Guarantee.
We will accept returns for any reason. Please refer to the return policy for more details.
All returns must be packaged safely using the same packaging we used to send the item to you. All original items must be included, and the return must be received in the same condition it was delivered. If the packaging we shipped it in was lost or damaged, please contact us before you return it. Shipping We are located in Iowa and can ship to most of the contiguous U.S. within 4 days or less. Many areas are 2–3 days.
Please verify the address is correct before completing the purchase. All items will be shipped to the address you choose during checkout. We are unable to change the shipping address or cancel the order after it has been placed.
All purchases with a total price of $750 or more will require a signature on delivery.#8244
