This Cisco 2821 Integrated Services Router (ISR) is a 2U modular enterprise branch office router with 128 MB Flash
Physical & Hardware SpecsForm Factor: 2U rack-mountable chassis (Dimensions: 3.5 in x 17.3 in x 16.4 in / 8.9 cm x 43.8 cm x 41.7 cm)
Weight: Approximately 25 lbs (11.4 kg)
LAN/WAN Ports: 2 built-in 10/100/1000 Mbps Gigabit Ethernet ports (RJ-45)
USB Ports: 2 USB 1.1 ports
Management Port: Yes (Aux/Console)Memory & StorageDRAM Memory: 128 MB standard (up to 512 MB or 1 GB maximum depending on Memory: 64 MB standard (up to 128 MB or 256 MB maximum depending on configuration)Expansion & SlotsHWIC / WIC / VIC / VWIC Slots: 4 high-speed WAN interface card (HWIC) slots
Network Module Slot: 1 slot supporting NM, NME, and NME-X modules
AIM Slots: 2 Advanced Integration Module (AIM) slots for hardware-accelerated security, VPN, or compression
PVDM (DSP) Slots: 3 integrated motherboard slots for Packet Voice DSP Modules
EVM Slot: 1 Extension-Voice-Module slotSoftware & PerformanceMinimum Cisco IOS Version: Cisco IOS 12.3(8)T (supports IP Base, Advanced IP Services, and Security/Voice bundles)
Voice Support: Supports up to 96 IP phones via Cisco CallManager Express (CME)
Security: Onboard hardware-accelerated encryption (DES, 3DES, AES), integrated firewall, Intrusion Prevention System (IPS), and VPN (IPSec, SSL, MPLS)Environment & PowerOperating Temperature: 32°F to 104°F (0°C to 40°C)
Operating Humidity: 5% to 95% (non-condensing)
Power Options: Internal AC power supply (120/230V AC) or optional DC power supply configurations
System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
Technical Support: Cisco
Copyright (c) 2009 by cisco Systems, Inc.
c2821 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80program load complete, entry point: 0x8000f000, size: 0x3f672b0
Self decompressing the image : [OK]Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0003E8 0X00474800 C2821 Mainboard
0X00264050 Onboard VPN
0X000021B8 Onboard USB
0X002C29F0 public buffer pools
0X00211000 public particle 0X00BAE3F8If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 12Mb.
Using 2 percent iomem. [12Mb/512Mb] Restricted Rights LegendUse, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
Technical Support: Cisco
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 15-Nov-10 21:40 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
CiscoInstalled image archive
Cisco 2821 (revision 52.57) with 512000K/12288K bytes of memory.
Processor board ID FTX1451ALWW
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
239K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
--- System Configuration Dialog ---Would you like to enter the initial configuration dialog? [yes/no]: default, the following "voice service voip" !!
!!sub-command is enabled: !!
!! ip address trusted authenticate !!
!! !!
!!The command enables the ip address authentication !!
!!on incoming H.323 or SIP trunk calls for toll fraud !!
!!prevention supports. !!
!! !!
!!Please use "show ip address trusted list" command !!
!!to display a list of valid ip addresses for incoming !!
!!H.323 or SIP trunk calls. !!
!! !!
!!Additional valid ip addresses can be added via the !!
!!following command line: !!
!! voice service voip !!
!! ip address trusted list !!
!! ipv4 <ipv4-address> [<ipv4 network-mask>] RETURN to get started!
*Oct 16 21:42:17.719: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Oct 16 21:42:17.727: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Oct 16 21:42:19.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Oct 16 21:42:19.283: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Oct 16 21:42:19.283: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Oct 16 21:42:20.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Oct 16 21:42:20.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Oct 16 21:42:46.391: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Oct 16 21:42:46.391: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Oct 16 21:42:48.979: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
Technical Support: (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 15-Nov-10 21:40 by prod_rel_team
*Oct 16 21:42:48.983: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Oct 16 21:42:49.415: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Oct 16 21:42:49.415: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Oct 16 21:42:49.415: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Oct 16 21:42:49.415: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFFSh Version
Router#sh version
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
Technical Support: Cisco
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 15-Nov-10 21:40 by prod_rel_teamROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)Router uptime is 2 minutes
System returned to ROM by power-on
System image file is reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found at:
CiscoIf you require further assistance please contact us by sending email to
CiscoCisco 2821 (revision 53.51) with 512000K/12288K bytes of memory.
Processor board ID FTX1451ALWW
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
239K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
License Info:License PID CISCO2821 FTX1451ALWWConfiguration register is 0x2143Sh ip interface brief
Router#sh ip interface brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down downSh Inventory
Router#sh inventory
NAME: "2821 chassis", DESCR: "2821 chassis"
PID: CISCO2821 , VID: V08 , SN: is a Cisco V04 CISCO2821 2800 Series Integrated Services Router. Cosmetically there are some scratches and slight marks but nothing that stops it from working properly. Please take note, all photos are from the CISCO2821 2821 Series Integrated Services Router you will receive.Included items:
1 CISCO2821 V04 2821 Series Integrated Services Router1 Power Cord2 Brackets
Warranty/Returns:
30 days warranty on hardware only. Problems caused by abuse or tampering will not be covered by the warranty. In the unlikely event that a problem does arise on the hardware within 30 days period, please contact us through e-bay Messages for repair, replacement, or refund.
We offer 30 days to return the item and it must be in the same condition as received complete with all accessories. Buyer pays return shipping unless something was not described accurately.Telco Related items:
I am retired and selling off all of my surplus telco gear and equipment so keep checking my other items for other good telco deals with fair pricing.Shipping:
Fast Shipping within 24 Business-Hours with 30 Days Warranty
We ship within 24 hours (except weekend or holidays) after receiving full payment. Shipping is ONLY in the lower 48 states and we do not ship to APO or PO boxes. Shipping vendor will be chosen by the seller after the purchase when free shipping is offered.
Local Pickup is availableContact Us:
We guarantee the device being sold. If you have any issues, questions or concerns, before and after sale, please feel free to e-mail through messaging; we normally respond within 24 hours, if not sooner. To contact us, go to "Questions and Answers about this item" at the bottom of the list and click on "Ask a question". Select the type of question you want to ask and click on "Contact the seller".#318