Product description Real-World Test: Long-Range WiFi Bridge Between Buildings The video showcases the product in use.The video guides you through product setup.The video shows the product being unpacked. PtP WiFi bridge for farms, barns, shops

See the AdaLov CPE660 in a real-world outdoor setup. Watch how the pre-paired 5.8GHz bridge helps extend a network between buildings with focused 14dBi antennas, PoE power, and simple wall or pole mounting—ideal for barns, garages, shops, cameras, and more.

Versatile Outdoor WiFi Bridge for Homes, Cameras & Remote Buildings

From snowy yards and security cameras to rooftops, barns and outbuildings, CPE660 is built for flexible outdoor deployment. Its weather-resistant housing, directional 5.8GHz link and adjustable mounting options help create a stable connection wherever clear line of sight is available.

Clear Line of Sight and Precise Alignment for Stronger Bridge Performance

For best CPE660 performance, keep both bridges facing each other with a clear line of sight. Buildings, walls, trees and other obstacles can weaken or block the signal. Careful mounting and accurate antenna alignment help improve signal strength, stability and throughput across long-distance links.

Flexible 24-48V PoE & Easy Master-Slave Setup Flexible 24–48V PoE Power Options

Power the CPE660 with the included 24V PoE adapter or a compatible 24–48V PoE switch through the supported port. Flexible power options simplify outdoor installation and help integrate the bridge into different network setups with less cabling.

Quick Master & Slave Bridge Pairing

Set up the CPE660 bridge pair with simple Master and Slave mode selection. The built-in digital display clearly shows bridge status and pairing information, helping you configure matched units quickly for a stable point-to-point wireless connection.

1 PTP-Network Extend 2 PTP-Surveillance cameras 3 Point to Multi-Point 4 PTP -- Muil-cameras 5 Starlink Network Extend Rugged Outdoor Bridge Kit for All-Weather Use Rugged IP65 Outdoor Design for Year-Round Use

Built for demanding outdoor environments, the CPE660 features an IP65-rated housing that helps resist rain, dust, sun exposure and cold conditions. Install it on exterior walls or poles for reliable long-range wireless bridging across homes, farms, barns, garages and job sites.

Complete CPE660 Outdoor Wireless Bridge Kit

Everything you need for a convenient point-to-point setup. The CPE660 kit includes two wireless bridge units, PoE adapters, adjustable mounting brackets, cable ties, screws and a user manual, making installation easier for homes, barns, garages, shops and remote buildings.

• LONG-RANGE WIRELESS BRIDGE FOR MULTIPLE LOCATIONS: AdaLov CPE660 creates a point-to-point WiFi bridge between buildings without running costly Ethernet cable. Designed for farms, barns, shops, garages, warehouses, factories and construction sites, it extends a network across open areas up to 3KM with clear line of sight. Use it to share one internet connection, connect remote CCTV or IP cameras, or bring WiFi to an outbuilding; also compatible with Starlink for flexible rural networking.
• FAST 5.8GHZ CONNECTION UP TO 300MBPS: Built for stable long-distance data transmission, the CPE660 outdoor wireless bridge operates on the 5.8GHz band and supports wireless speeds up to 300Mbps. It is a practical choice for video surveillance, remote internet access and everyday network traffic between separate buildings. The focused 5GHz link helps reduce cable installation needs while providing dependable connectivity for homes, farms, barns, shops, garages, warehouses and job sites.
• DUAL ETHERNET PORTS WITH FLEXIBLE POE POWER OPTIONS: CPE660 provides two 100Mbps Ethernet ports for different deployment needs. One port supports 24V PoE only, while the other supports 24-48V PoE and can be powered from a compatible PoE switch, helping simplify wiring and remote installation. IMPORTANT: Do not connect a PoE switch to the 24V-only PoE LAN port, as higher-voltage PoE can damage or burn out the unit. Always use the correct port and supported voltage before powering the bridge.
• 14DBI HIGH-GAIN DIRECTIONAL ANTENNA: The integrated 14dBi antenna focuses wireless energy toward the paired bridge for stronger point-to-point transmission over long distances. With proper alignment and a clear line of sight, CPE660 is designed to maintain a stable 5.8GHz connection between buildings, making it well suited for farms, barns, warehouses, garages, shops and surveillance locations. Use it as a long-range network extender where trenching cable is difficult, disruptive or expensive.
• EASY PRE-PAIRED WDS PLUG-AND-PLAY SETUP: CPE660 comes pre-programmed in WDS bridge mode to simplify installation, so users can create a point-to-point link without first entering a complex web interface. Mount the two units, connect the included PoE adapters, aim them toward each other and power on to build the wireless bridge. This straightforward design is useful for extending internet to a barn, shop, garage, warehouse, camera pole or remote building with less setup time and fewer steps.
• MULTIPLE MODES FOR PTP, PTMP, AP AND BRIDGE NETWORKS: More than a simple building-to-building WiFi extender, CPE660 supports modes for different network layouts, including point-to-point, point-to-multipoint, AP, client bridge and CPE applications. Use a pair to connect two locations or build a broader outdoor network for several remote areas. It is a flexible option for CCTV cameras, farms, barns, shops, warehouses, factories and construction sites where network needs may change over time.
• IP65 OUTDOOR HOUSING FOR YEAR-ROUND INSTALLATION: CPE660 uses an IP65-rated enclosure that helps protect the wireless bridge from rain, dust and changing weather. The durable housing is suited for exterior walls, poles, barns, garages, warehouses, shops and other exposed locations. Use it for long-range internet extension or surveillance networking while keeping the directional antenna outdoors where it can maintain a line of sight between bridge units for reliable point-to-point performance.
• ADJUSTABLE WALL OR POLE MOUNTING FOR BETTER ALIGNMENT: The package includes two adjustable bracket mounts with vertical and horizontal positioning, helping you aim each 14dBi directional antenna toward the other bridge. Proper placement and clear line-of-sight alignment support long-range point-to-point performance across farms, yards and industrial sites. Mount CPE660 on a wall or pole at a house, barn, shop, garage, warehouse or camera location to build a stable outdoor wireless link.
• COST-EFFECTIVE ALTERNATIVE TO LONG ETHERNET RUNS: Extend a network between separate buildings without trenching, burying or stringing long Ethernet cable. CPE660 uses a directional 5.8GHz wireless bridge to carry the connection across open space, helping reduce installation labor and cabling costs for farms, barns, workshops, garages, warehouses and camera systems. It is useful where leased lines or new cable routes are impractical, while wired devices can still connect through the LAN ports.
• COMPLETE OUTDOOR BRIDGE KIT WITH POE ACCESSORIES: The CPE660 package includes hardware for point-to-point installation, including PoE adapters, adjustable mounting brackets and cable ties. PoE helps place each outdoor bridge where signal alignment is best while carrying power through the network cable to the radio. Use the kit to connect a home, farm, barn, shop, garage, warehouse or surveillance area, with lifetime technical support for setup, operating modes, alignment and network integration.