TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.Front plastic plate is missing.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO 2821 INTEGRATED SERVICES ROUTER ISR 2821 VPN SECURITY NETWORK ROUTER
• (2) - CISCO WIC 1DSU-T1 V2 MODULE CARD
• (1) - POWER CORD
• (1) - CISCO 64MB FLASH CARD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Initializing memory for ECC
.
c2821 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0x3705684
Self decompressing the image : [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0003E8 0X00474800 C2821 Mainboard
0X00264050 Onboard VPN
0X000021B8 Onboard USB
0X002C29F0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00BAE3F8
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 12Mb.
Using 4 percent iomem. [12Mb/256Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 15:13 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 2821 (revision 49.46) with 249856K/12288K bytes of memory.
Processor board ID FTX1330AJY2
2 Gigabit Ethernet interfaces
2 Serial interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Press RETURN to get started!
*Mar 26 16:45:56.799: SERVICE_MODULE(Serial0/0/0): self test finished: Passed
*Mar 26 16:45:59.595: SERVICE_MODULE(Serial0/1/0): self test finished: Passed
*Mar 26 16:46:17.503: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Mar 26 16:46:17.511: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Mar 26 16:46:18.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Mar 26 16:46:18.907: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Mar 26 16:46:18.907: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Mar 26 16:46:18.907: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down
*Mar 26 16:46:18.907: %LINK-3-UPDOWN: Interface Serial0/1/0, changed state to down
*Mar 26 16:46:20.331: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Mar 26 16:46:20.331: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthe
Router>rnet0/1, changed state to down
*Mar 26 16:46:20.331: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down
*Mar 26 16:46:20.331: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down
*Mar 26 16:46:20.735: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 26 16:46:21.391: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 15:13 by prod_rel_team
*Mar 26 16:46:21.395: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar 26 16:46:21.615: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 26 16:46:21.615: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Mar 26 16:46:21.615: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 26 16:46:21.615: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Mar 26 16:46:22.571: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Mar 26 16:46:22.587: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Mar 26 16:46:22.611: %LINK-5-CHANGED: Interface Serial0/0/0, changed state to administratively down
*Mar 26 16:46:22.627: %LINK-5-CHANGED: Interface Serial0/1/0, changed state to administratively down
*Mar 26 16:46:24.607: %SYS-6-BOOTTIME: Time taken to reboot after reload = 171 seconds
Router>show ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 15:13 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System returned to ROM by reload at 16:43:32 UTC Thu Mar 26 2026
System image file is />
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2821 (revision 53.50) with 249856K/12288K bytes of memory.
Processor board ID FTX1330AJY2
2 Gigabit Ethernet interfaces
2 Serial interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router>
Please Click Here to Visit Our StoreSearchBy31 - 276074 | Loc: F22 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |22.00"x20.00"x7.00"33.00lbs |Start: $0.00 | BIN: $84.99 | |2026-03-27 ||175699
