TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO 2960X WS-C2960X-48TD-L 48-PORT SFP+ GIGABIT NETWORK SWITCH
• (1) - CISCO C2960X-STACK MODULE
• (1) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:Loading />n"...Verifying image />..................Image passed digital signature verification
File />uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E6, R
ELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 16-Dec-16 21:27 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[7]: 10 files, 1 directories
mifs[7]: Total bytes : 1806336
mifs[7]: Bytes used : 690688
mifs[7]: Bytes available : 1115648
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 2 files, 1 directories
mifs[8]: Total bytes : 3870720
mifs[8]: Bytes used : 1213440
mifs[8]: Bytes available : 2657280
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes : 258048
mifs[9]: Bytes used : 8192
mifs[9]: Bytes available : 249856
mifs[9]: mifs fsck took 0 seconds.
mifs[9]: Initialization complete.
mifs[10]: 5 files, 1 directories
mifs[10]: Total bytes : 258048
mifs[10]: Bytes used : 8192
mifs[10]: Bytes available : 249856
mifs[10]: mifs fsck took 1 seconds.
mifs[10]: Initialization complete.
mifs[11]: 652 files, 20 directories
mifs[11]: Total bytes : 122185728
mifs[11]: Bytes used : 27193344
mifs[11]: Bytes available : 94992384
mifs[11]: mifs fsck took 1 seconds.
mifs[11]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled
POST: MA BIST : Begin
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
extracting front_end/front_end_ucode_info (43 bytes)
Software version is different so extracting
the whole bundle
Waiting for Stack Master Election...
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : MAC Loopback Passed
POST: EMAC Loopback Tests : PHY Loopback Passed
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 3 booting as Master
Waiting for Port download...Complete
Initializing Port Extension Feature Support...
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C2960X-48TD-L (APM86XXX) processor (revision R0) with 524288K bytes of
memory.
Processor board ID FOC2131S1Z3
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 74:86:0B:D9:C1:80
Motherboard assembly number : 73-16688-05
Power supply part number : 341-0537-02
Motherboard serial number : FOC21299WC1
Power supply serial number : LIT21224ZNM
Model revision number : R0
Motherboard revision number : A0
Model number : WS-C2960X-48TD-L
Daughterboard assembly number : 73-14200-03
Daughterboard serial number : FOC21307CKG
System serial number : FOC2131S1Z3
Top Assembly Part Number : 68-100466-02
Top Assembly Revision Number : D0
Version ID : V06
CLEI Code Number : CMMNH00ARE
Daughterboard revision number : B0
Hardware Board Revision Number : 0x19
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 3 52 WS-C2960X-48TD-L 15.2(2)E6 C2960X-UNIVERSALK9-
M
Press RETURN to get started!
*Mar 1 00:00:27.759: Read env variable - LICENSE_BOOT_LEVEL =
*Jan 2 00:00:00.153: Module nam
e = c2960x_lanbase Next reboot level = lanbase and License = lanbase
Jan 1 18:16:27.202: Flexstack module is 1
Jan 1 18:16:27.300: %HPAA:hpaa_port_bitmap_init:254:n_ports = 52, sizeof (**hpa
a_port_bitmap.bitlist_array) = 16
Jan 1 18:17:14.416: %STACKMGR-4-SWITCH_ADDED: Switch 3 has been ADDED to the st
ack
Jan 1 18:17:15.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, chan
ged state to down
Jan 1 18:17:15.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEtherne
t0, changed state to down
Jan 1 18:17:17.638: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
vlan
Jan 1 18:17:43.556: %STACKMGR-5-SWITCH_READY: Switch 3 is READY
Jan 1 18:17:43.556: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 3 has ch
anged to state DOWN
Jan 1 18:17:43.556: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 3 has ch
anged to state DOWN
Jan 1 18:17:43.986: %STACKMGR-5-MASTER_READY: Master Switch 3 is READY
Jan 1 18:17:43.989: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E6, R
ELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 16-Dec-16 21:27 by prod_rel_team
Jan 1 18:17:44.097: %PLATFORM-6-FLEXSTACK_INSERTED: FlexStack module inserted i
n Switch 3.
Jan 1 18:17:45.842: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
Jan 1 18:17:45.978: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to d
own
Jan 1 18:17:46.981: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEtherne
t0, changed state to down
Switch>
Switch>show ver
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E6, R
ELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 16-Dec-16 21:27 by prod_rel_team
ROM: Bootstrap program is C2960X boot loader
BOOTLDR: C2960X Boot Loader (C2960X-HBOOT-M) Version 15.2(3r)E1, RELEASE SOFTWAR
E (fc1)
Switch uptime is 1 hour, 2 minutes
System returned to ROM by power-on
System restarted at 18:15:58 UTC Sat Jan 1 2000
System image file is />z.152-2.E6.bin"
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C2960X-48TD-L (APM86XXX) processor (revision R0) with 524288K bytes of
memory.
Processor board ID FOC2131S1Z3
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 74:86:0B:D9:C1:80
Motherboard assembly number : 73-16688-05
Power supply part number : 341-0537-02
Motherboard serial number : FOC21299WC1
Power supply serial number : LIT21224ZNM
Model revision number : R0
Motherboard revision number : A0
Model number : WS-C2960X-48TD-L
Daughterboard assembly number : 73-14200-03
Daughterboard serial number : FOC21307CKG
System serial number : FOC2131S1Z3
Top Assembly Part Number : 68-100466-02
Top Assembly Revision Number : D0
Version ID : V06
CLEI Code Number : CMMNH00ARE
Daughterboard revision number : B0
Hardware Board Revision Number : 0x19
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 3 52 WS-C2960X-48TD-L 15.2(2)E6 C2960X-UNIVERSALK9-
M
Configuration register is 0xF
Switch> Please Click Here to Visit Our StoreSearchBy31 - 275984 | Loc: F33 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |22.00"x15.00"x5.00"12.00lbs |Start: $0.00 | BIN: $74.99 | |2026-03-24 ||51268
