Cisco N9K-C93180LC-EX up to 32x 40/50GbE QSFP+ or 18x 100GbE QSFP28 PE AF AC PSUThis listing is for 1 (one) Cisco Nexus N9K-C93180LC-EX Ethernet switcheRear to Front airflow -- Port Side Exhaust2x 500W AC Power suppliesSupport is available, please contact us for a quote (duration, response time, service level (SmartNet, solution support etc)Out of the boox will boot into ACI mode, can be re-configured to NX-OS <--please contact us if this is desired prior to shipping outAlso available withACI Advantage Perpetual Paper License, please listing for info below or visit Cisco with the following:2x 500W power supplies4x fan kits2x 2M C13-C14 power cords1x rack mounting kitACI-N9KDK9-13.1.2 OS installedPlease contact us with any questionsThank youFrom Cisco:The Cisco Nexus 93180LC-EX Switch:50GbE capable 1RU switch that supports 3.6 Tbps of bandwidth and over 2.6 bpps across up to 32 fixed 40GbE and 50GbE QSFP+ ports OR up to 18 fixed 100GbE QSFP28 portsThe switch can also support up to 72x 10GbE ports using breakout cablesA variety of flexible port configurations are supported using templatesThis listing is for one Cisco Nexus N5K-C5672UP Ethernet switch
2x 1100W AC Power supplies Back to Front Airflow (Fan-Side Intake)3x Fan Modules Back to Front Airflow (Fan-Side Intake)
Please contact us with any questions
Thank you
LOC: WHSE-E-S1-R1
Figure 1.Cisco Nexus 5672UP Switch (Port-Side View)
The Cisco Nexus 5672UP is constructed with the components shown in Figure 2. The Cisco Nexus 5672UP has two 1+1 redundant, hot-swappable power supplies and three hot-swappable independent fans with support for 2+1 redundancy.
Figure 2.Cisco Nexus 5672UP Switch (Fan-Side View)
The Cisco Nexus 5672UP supports both port-side intake (red handle) and fan-side intake (blue handle) airflow options for flexible mounting.
Cisco Nexus 5672UP-16G Switch
●The Cisco Nexus 5672UP-16G Switch (Figure 3) is a 10 and 40 Gigabit Ethernet (40-Gbps on uplink and network-facing ports) switch offering wire-speed performance for up to seventy-two 10 Gigabit Ethernet ports (using QSFP breakout cables). The Cisco Nexus 5672UP-16G Switches are Layer 2 and 3 nonblocking 10 and 40 Gigabit Ethernet and FCoE-capable switches with up to 1.44 Tbps of internal bandwidth.
The Cisco Nexus 5672UP-16G offers 48 10 Gigabit Ethernet ports, of which the first 24 ports are capable of doing 1/10G Ethernet and the last 24 ports (highlighted in orange on the chassis for easy identification) are unified ports that support 16-, 8-, 4-, and 2-Gbps Fibre Channel. All 48 fixed ports support classical Ethernet and FCoE.
The 24 unified ports provide 16-, 8-. 4-, and 2-Gbps Fibre Channel as well as 10 Gigabit Ethernet and FCoE connectivity options. The Cisco Nexus 5672UP-16G also offers 6 ports of 40 Gbps using QSFP transceivers for Ethernet and FCoE support. The Cisco Nexus 5672UP-16G has three fan modules and two power supplies and supports VXLAN in bridging and routing modes on all ports at line rate, enabling the migration of virtual machines between servers across Layer 3 networks. The switch also offers up to 128 buffer-to-buffer credits per port, helping provide SAN extension of up to 16 kilometers at 16-Gbps Fibre Channel speed assuming full Fibre Channel frame size of 2122 bytes.
Figure 3.Cisco Nexus 5672UP-16G Switch (Port-Side View)
The Cisco Nexus 5672UP-16G platform is constructed with the components shown in Figure 4. The Cisco Nexus 5672UP-16G has two 1+1 redundant, hot-swappable power supplies and three hot-swappable independent fans with support for 2+1 redundancy.
Figure 4.Cisco Nexus 5672UP-16G Switch (Fan-Side View)
The Cisco Nexus 5672UP-16G supports both port-side intake (red handle) and fan-side intake (blue handle) airflow options for flexible mounting.
