DSLRKIT PSE18AT

9 Ports (1Uplink, 8 PoE) Power Over Ethernet Switch

IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)

Auto Detection Powered Device

AC Input: 100V ~ 240V

52VDC up to Max. 30W/port, 8ports Total budget 120Watt

10/100Mbps ,Wall Mount

 

It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 8 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.

Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....

Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port

Features:

• Up to 30w/port of Power on
• Complies to IEEE 802.3af/802.3at PoE standard
• Compatible with All IEEE 802.3af/802.3at 
• Safe: Low power Devices Receive Only the Power They Need
• Safe and Reliable Power to WLAN Access Points
• Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
• Supports 10/100 Base-T applications
• Compact Design Fits Easily in WLAN Access
• Plug-and-Play no configuration required
• Each port supports auto MDI/MDIX

 

Specification:

ALL LAN/WAN Port:

Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。

LAN Port 1-4:

any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs)

LED

Power (Red)

PoE In-Use (Orange LAN Port)

10/100 LNK / ACT(Green)

Product Dimensions

197mm W x 73mm D x 32mm H

Weight

790g(switch and Power adapter)

Power Requirement

100~240V AC, 50-60 Hz

Power Consumption

120 Watts maximum

PoE Standard

IEEE 802.3af, IEEE802.3at

PoE Power Output

52VDC, Max. 30Watt/port, 8ports Total budget 120Watt

PoE Power Supply Type

pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan

PoE Power Budget

PoE: Max. 120W

Regulation Compliance

FCC Part 15 Class A, CE

Operating

Temperature: 0~50 Degree C, Relative Humidity: 20~95%

Storage

Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing)

Standards Compliance

IEEE 802.3: 10Base-T

IEEE 802.3u: 100Base-Tx

IEEE 802.3x: Flow Control

Item Included:

 DSLRKIT PSE18AT PoE switch x1(with Retail Box)
 AC Power Adapter(DC OutPut: 52V/2.3A) x1
 AC Power Cable x1
Please select the power plug type as per your request.

12 Months Warranty from the data of purchase.