52V 120Watt(Max.140W)(If you switch to the EXTEND mode, the Max allowable Network Cable length will increased to 250 meters. So we use 52V power adapter. This will avoids the power loss over the long distances, and will make sure the PoE IP Camera working.)
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V(or 52V) PoE Ethernet port
Gigabit(10/100/1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
10x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 8-Ports PoE function - Support EXTEND mode, max Network Cable length to 250 meters.
- Midspan Mode-B Unsolicited Power(4,5+/7,8-)
- Supports PoE power up to 120W for all PoE ports, Per port Max 52V 1A or 50Watt
- Supports PoE IEEE802.3af/at compliant Powered Device (PD)
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full/half duplex transfer mode for each port.
ALL Port: Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with4 pairs UTP Cat5/5e/6 cable。 Power LinkPort1-8: any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) Power LED LED ON: power on. LED OUT: power off GreenLight LINK/ACT LED ON Indicates the port is connected to a network device and has been started LED OFF Indicates that this port is not connected to a network device or has not been started
Standard
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex flow control
Protocol
CSMA/CD Ethernet
Data TransferRate
Ethernet: 10Mbps (Half Duplex)20Mbps (Full Duplex)
Fast Ethernet: 100Mbps (Half Duplex)200Mbps (Full Duplex)
IC Chips
IC Plus IP178G +IP175G
Network Media(Cable)
10Base-T(EXTEND mode): UTP category 5e, 6 cable (maximum 250m) EIA/TIA-568 100Ω STP (maximum 250m)
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
PoE Power on RJ45
Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8
DC Output: 52V, Per port Max 1A or 50Watt,8 POE ports Total Max. 120Watt
Number of Ports
10x 10/100Mbps Auto-Negotiation RJ45 ports with8 PoE enabled (port-1~ port-8)
Power Input
AC Input: 110V ~ 240VAC, 50Hz ~ 60Hz.
DC OutPut: 52V/2.7A
Power Consumption
3.2Watts (max. no PD connected)
According to the actual power consumption of equipment
Temperature
Operation Temperature:0 ~40℃(32 ~104℉)
Storage Temperature: -40 ~70℃(-40 ~158℉)
Humidity
Storage Humidity 5%~90% non-condensing, OperatingHumidity 10%~90% non-condensing
Product Dimensions
197mm W x 73mm D x 32mm H
RAM Register Capacity
64K bytes per device
MAC Address List
1K entries per device
Frame Forward Rate
10Mbps Ethernet: 14880pps/Port
100Mbps Ethernet: 14880pps/Port
AC Power Adapter(DC OutPut: 52V/2.7A) x1
AC Power Cable x1