New, unopened, never used
Product overview of the Dell SNPM788DCK2/16G
component is the Dell 16GB DDR2 memory, also known as the SNPM788DCK2/16G memory module.
This memory module is specifically designed to be used in Dell PowerEdge servers, which are known for their high-performance computing capabilities.
DDR2 memory operates at a clock speed of 400 MHz to 800 MHz and offers a maximum transfer rate of 6.4 GB/s. It uses a 240-pin dual in-line memory module (DIMM) form factor and is available in different capacities ranging from 512 MB to 16 GB.
Features and Specifications
The Dell 16GB DDR2 memory module, also known as the SNPM788DCK2/16G memory module, is a fully buffered ECC registered SDRAM DIMM memory module designed specifically for use in Dell PowerEdge servers. Let us take a closer look at its features and specifications.
Capacity and Speed
The Dell 16GB DDR2 memory module comes with a total capacity of 16 GB, divided into two 8 GB modules. The memory operates at a clock speed of 667 MHz, which is relatively low compared to the current DDR4 memory standards but is still suitable for older server systems. The memory offers a maximum transfer rate of 5.3 GB/s, which is significantly lower than the maximum transfer rate of DDR4 memory.
Fully Buffered ECC Registered SDRAM DIMM
The Dell 16GB DDR2 memory module is a fully buffered ECC registered SDRAM DIMM memory module. Let us understand what each of these terms means.
Fully Buffered: Fully buffered memory modules are designed to improve the signal quality and reduce the electrical load on the memory controller by using an additional buffer chip between the memory controller and the memory modules.
ECC Registered: ECC (Error-Correcting Code) memory is designed to detect and correct errors that occur during data transmission. ECC memory uses a technique called parity checking to detect and correct errors.
SDRAM DIMM: Synchronous Dynamic Random Access Memory (SDRAM) DIMM is a type of memory module that synchronizes the memory clock with the system clock for faster and more efficient data transfer.
Compatibility
The Dell 16GB DDR2 memory module is designed specifically for use in Dell PowerEdge servers. It is compatible with various Dell PowerEdge server models, including the Dell PowerEdge 1950, Dell PowerEdge 2950, and Dell PowerEdge R900.
Overall, the Dell 16GB DDR2 memory module is relatively easy to install and can be done without the need for a professional. The memory module comes with a 240-pin dual in-line memory module (DIMM) form factor, which is compatible with most Dell PowerEdge server models.
General Information about the Dell SNPM788DCK2/16G
- Manufacturer : Dell
- Model Number or SKU# SNPM788DCK2/16G
- Type : Memory (RAM)
- Interface: 16GB DDR2 SDRAM Memory Module
Technical Information
- Storage Capacity: 16GB
- Memory Technology: DDR2 SDRAM
- Number Of Modules: 2 X 8GB
- Memory Speed: 667mhz DDR2-667/PC2-5300
- Data Integrity Check: Ecc Chipkill
- Signal Processing: Registered
- Ram Features: Fully Buffered
- Form Factor: 240-Pin Dimm
Physical Characteristics
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility
- Dell Poweredge 1950 Iii
- Dell Poweredge 2900 Iii
- Dell Poweredge 2950 Iii
- Dell Poweredge M600
- Dell Poweredge R900
- Dell Poweredge 1900
- Dell Poweredge 1950
- Dell Poweredge 1955
- Dell Poweredge 2900
- Dell Poweredge 2950
- Dell Poweredge Sc1430
- Dell Powervault Nf500
- Dell Powervault Nf600
- Dell Precision Workstation T5400
- Dell Precision Workstation T7400
- Dell Precision Workstation T7400
- Dell Precision Workstation T7400
- Dell Precision Workstation 690
- Dell Precision Workstation R5400
- Dell Precision Workstation 490
