UBB Store

Dell PowerEdge FN410s 4-port 10GbE SFP+ I/O Aggregator Module 0T6W0J
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dell PowerEdge FN410s 4-port 10GbE SFP+ I/O Aggregator Module 0T6W0J
Price: US $300.00
Included
  • 1 xDell PowerEdge FN410s 4-port 10GbE SFP+ I/O Aggregator Module addresses: 64K
  • Switch fabric capacity: 240 Gbps (Full-Duplex)
  • Forwarding capacity: 179 Mpps
  • Link aggregation: Up to 12 members per group, 24 LAG groups with stack support
  • In standalone mode, max 4 members per group and 1 uplink LAG group (Port-channel 128 default mode)
  • In stacking mode: max of 12 members per group and 1 uplink LAG group (stacking mode with FN410S and FN410T)
  • In PMUX mode: max of 24 LAG groups and multiple uplink LAG groups
  • In full-switch mode: max of 24 LAG groups and multiple uplink LAG groups
  • Line-rate Layer 2 switching: All protocols, including IPv4
  • Line-rate Layer 3 routing* : IPv4 and IPv6
  • Packet buffer memory: 4MB
  • CPU memory: 2GB
  • ACLs ingress egress in full switch mode

Stacking Attributes
  • Stacked units: Up to 6 IOAs (using 10GbE ports deployed via CLI)
  • Stacking bandwidth: Up to 40Gbps (using 1 x 10GbE ring)
  • Stacking topology: Ring and daisy chain
  • Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)
  • VLT supported in VLT, PMUX and Full-switch mode.
  • Stacking supported in stacking, PMUX and Full-switch mode with FN410S and FN410T.

RoutingLayer 3 Routing - full switch mode:
  • 1058 RIPv1
  • 2453 RIPv2
  • 2154 MD5 (OSPF)
  • 1587 NSSA (OSPF)
  • 2328 OSPFv2
  • 2740 OSPFv3
  • 4222 Prioritization and congestion avoidance
  • 4552 OSPFv3 IPsec BGP Communities
  • 2385 BGP MD5
  • 2439 BGP Route Flap Damping
  • 2796 BGP Route Reflection
  • 2918 BGP Route Refresh
  • 3065 BGP Confederations
  • 4360 BGP Extended Communities
  • 4893 BGP 4-byte ASN
  • 5396 BGP 4-byte ASN BG P Graceful Restart
  • 1195 Routing IPv4 with IS-IS
  • 5308 Routing IPv6 with SMIv1*
  • 1156 Internet MIB*
  • 1157 SNMPv1
  • 1212 Concise MIB Definitions*
  • 1215 SNMP Traps*
  • 1493 Bridges MIB*
  • 1850 OSPFv2 MIB*
  • 1901 Community-based SNMPv2
  • 2011 IP MIB*
  • 2012 TCP MIB*
  • 2013 UDP MIB*
  • 2096 IP Forwarding Table MIB*
  • 2570 SNMPv3*
  • 2571 Management Frameworks*
  • 2572 Message Processing and Dispatching*
  • 2575 SNMPv3 VACM*
  • 2576 Coexistence Between SNMPv1/v2/v3
  • 2578 SMIv2*
  • 2579 Textual Conventions for SMIv2*
  • 2580 Conformance Statements for SMIv2*
  • 2618 RADIUS Authentication MIB*
  • 2665 Ethernet-like Interfaces MIB*
  • 2787 VRRP MIB 2819 RMON MIB (groups 1, 2, 3, 9)*
  • 2863 Interfaces MIB*
  • 3273 RMON High Capacity MIB*
  • 3416 SNMPv2
  • 3418 SNMP MIB
  • 3434 RMON High Capacity Alarm MIB*
  • ANSI/TIA-1057 LLDP-MED MIB*
  • IEEE 802.1AB LLDP MIB*
  • IEEE 802.1AB LLDP DOT1 MIB*
  • IEEE 802.1AB LLDP DOT3 MIB*
  • sFlow.org with full-switch mode
    VLAN
    • 802.1Q VLAN tagging
    • 802.3ac frame extensions for VLAN tagging
    • Native VLAN
    • 802.1D Bridging, STP*
    • 802.1s MSTP*
    • 802.1w RSTP*
    • Force10 PVST+*
    • 2338 VRRP*
    *Available with full-switch mode
    Multicast
    • 4541 IGMPv1/v2 Snooping
    • 1112 IGMPv1*
    • 3569 SSM for IPv4*
    • 2236 IGMPv2*
    • 4541 IGMPv1/v2 Snooping
    • 3376 IGMPv3 draft-ietf-pim-sm-v2-new-05 PIM-SM*
    *Available with full-switch mode
    IEEE Compliance
    • 802.1AB LLDP
    • 802.1p L2 Prioritization
    • 802.3ab Gigabit Ethernet (1000Base-T)
    • 802.3ad Link Aggregation with LACP
    • 802.3ae 10GbE (10GBase-X)
    • 802.3u Fast Ethernet (100Base-TX)
    • 802.3x Flow Control
    • 802.3z Gigabit Ethernet (1000Base-X)
    • ANSI/TIA-1057 LLDP-MED
    • MTU supply: 100–240V AC 50/60Hz
    • Max. thermal output: 955.36 BTU/h
    • Max. current draw per system: 2A at 100/120V AC, 1A at 200/240V AC
    • Max. power consumption: 123 Watts
    • ISO 7779 A-weighted sound pressure level: 59.6dBA at 73.4°F (23°C)
    • Operating temperature: 32° to 140°F (0° to 60°C)
    • Operating humidity: 10 to 85% (RH), non-condensing
    • Max. non-operating specifications: Storage temperature: –40° to 158°F (–40° to 70°C)
    • Storage humidity: 5 to 95% (RH), non-condensing
    • UL/CSA 60950-1, Second Edition
    • EN 60950-1, Second Edition
    • IEC 60950-1, Second Edition Including all National
    • Deviations and Group Differences
    • EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide Optical Fibre Communication Systems
    • FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
    • Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
    • Canada: ICES-003, Issue-4, Class A
    • Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
    • Japan: VCCI V3/2009 Class A
    • USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
    • EN 300 386 V1.4.1:2008 EMC for Network Equipment
    • EN 55024: 1998 + A1: 2001 + A2: 2003
    • EN 61000-3-2: Harmonic Current Emissions
    • EN 61000-3-3: Voltage Fluctuations and Flicker
    • EN 61000-4-2: ESD
    • EN 61000-4-3: Radiated Immunity
    • EN 61000-4-4: EFT
    • EN 61000-4-5: Surge
    • EN 61000-4-6: Low Frequency Conducted Immunity
    • All components are RoHS compliant.



    Buy Now

Related Items