Used Dell PowerEdge R610 rackmount server in good working condition. The server has been extensively tested, including memory diagnostics, individual power supply operation, network connectivity, and all six drive-bay positions.

• Model: Dell PowerEdge R610

• Service Tag: 5XN7HM1

• Processors: 2 × Intel Xeon E5620 @ 2.40 GHz

• Total: 8 cores / 16 threads

• Memory: 36GB ECC DDR3, 1067 MHz

• Storage Controller: Dell SAS 6 HBA / LSI SAS1068E-IR

• Drive Bays: 6 × 2.5-inch hot-swap bays

• Drive Caddies: 6 included, empty

• Power Supplies: 2 × 495W redundant hot-swap PSUs

• Networking: 4 onboard Gigabit Ethernet ports plus dual-port expansion NIC

• Remote Management: iDRAC6

• BIOS: 6.6.0

• Optical Drive: TEAC DVD-ROM

• Successfully powered on and completed POST

• Both Xeon processors recognized in BIOS

• 36GB memory recognized in BIOS after reseating DIMMs

• MemTest86+ completed one full pass with zero errors on the memory available to the test at that time

• All six cooling fans confirmed spinning

• Both power supplies independently powered the server

• All six drive-bay positions individually tested using compatible SSDs, with successful detection by the SAS controller

• Dell SAS 6 controller and backplane detected

• Four onboard Ethernet ports confirmed link activity

• iDRAC6 initialized successfully

• VGA output and USB boot functionality verified

Used equipment with normal cosmetic wear from previous rack installation.

The system initially displayed a memory-related POST warning, which stopped recurring after the RAM was reseated. BIOS subsequently recognized 36GB of installed memory.

Included:

• Dell PowerEdge R610 server

• 36GB installed ECC DDR3 memory

• Two Intel Xeon E5620 processors

• Two 495W power supplies

• Six empty 2.5-inch drive caddies

• Installed storage controller and expansion card

Not included:

• Hard drives or SSDs

• Operating system

• Rack rails

• Monitor, keyboard, or other testing accessories