Denture Base Resin
- Highly biocompatible
- Great durability and Appropriate aesthetics
- Low weight, and Low fabrication cost
- Be easy to process, adjust and repair
- Pink color
Highly biocompatible. Safe to allergic patients.
It has high biocompatibility with oral tissue. Ensure a healthy oral environment and a high degree of comfort.
Excellent mechanical properties.
The denture base printed with our 3166 resin are durable and resist fracture.
Satisfy aesthetic demands.
Pink color, natural looking; Maintains color stability during 3D valueTesting methodPhysical and
(before D1084-1997Density1.05-1.15ASM D1875-69(1980)Physical and
(after curing)Curing D2240-05(2010)bending strength＞3kgTest strip 4mmPost Processing Steps
1- Washing
– After the printing is completed, wash the part as attached to the building plate with alcohol (>%95) for 3 minutes.
– Make sure that alcohol covers the part entirely when washing.
– Since the Denture resin is biocompatible never wash it with the alcohol used for other resins before.
– Use a brush to remove uncured resin if needed.
– Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
– Use air-compressor to dry the washed part.
– Make sure that the part is dry and uncured resin is cleaned up completely.
– If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
– Remove the printed part from the building plate using a scraping tool.
– Be very careful not to damage the model.
4- Post Curing
– UV post-curing for 5 minutes
– After the post curing, supports should be removed from the model cautiously and then desired sandblasting and polishing can be done
Package included1 x 3D printer denture base resin（1kg）
