Included pics of video still shots are to show you that the image has no defects. Buyer should assume that the actual image quality is BETTER than any pic we have included, as the camera is not 4K and takes away from, and adds to the actual image colors and overall quality.Digital Projection E-VISION LASER 11000 4K-UHD 10,500 LUMEN, NEW, 0 HOURS. FACTORY BOX ALL ACCESSORIES INCLUDING FACTORY REMOTE. $23,000 RETAIL COMES WITH PANASONIC ZOOM LENS ET-DLE150, SHORT THROW. YES, ALL THE LEGACY PANASONIC LENSES WORK IN THESE PROJECTORS. THIS MEANS YOU CAN BUY AN ET-DLE055 WITH .078 SHORT THROW RATIO, FOR APPROX. $450. WE SAW ONE LISTED LAST WEEK FOR $350. WE TESTED THIS WITH THE 055 AND IT LOOKED INCREDIBLE!
PROJECTOR IS BRAND NEW, UNWRAPPED IN FACTORY BOX. PROJECTOR PICTURED WITH LENS, IS NOT THE PROJECTOR YOU WILL RECEIVE. ITS JUST TO SHOW YOU WHAT THE PROJECTOR LOOKS LIKE. THE UNWRAPPED PROJECTOR IS IN MINT CONDITION, 0 HOURS.
We are currently ENJOYING using the projector pictured, to watch Youtube 4K HDR10 Videos, and 4K UHD BluRay Movies, and we have to admit, its INCREDIBLE!!! The 4K image quality, combined with HDR10 AND 10,500 Lumens of Brightness, equals what might be, one of the BEST viewing experiences we've ever had! The nature videos and GoPro vids, as well as the under the ocean HDR10 videos, are Spectacular!!! My $60,000 Sony VPL-VW5000ES, has met its match, when it comes to ALL the non movie 4K HDR10 material available.DP E-Vision Laser 11000 4K-UHDExceptional Value & Class Leading Performance1-DLP Laser Projector

The E-Vision Laser 11000 4K-UHD projector delivers a stunning 10,500 ISO (9,500 ANSI) lumens from a stable solid-state light source, capable of producing over 20,000 hours of illumination. The 4K-UHD resolution produces stunning detail and image subtlety as only a 4K-UHD projector powered by Texas Instruments DLP chip can.

This single-chip projector was developed with Fit and Forget directive, ensuring it needs only minimal maintenance throughout the lifetime of the display. With resolutions of 4K-UHD (3840 x 2160) or WQXGA+ (2716 x 1528), this projector offers the ultimate in flexibility.

Equally compelling is the lack of lamp replacements due to the solid-state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at time of purchase. This key characteristic allows the E-Vision Laser 11000 4K-UHD to have a much lower cost of ownership over the lifespan of the display.

Combine the exceptionally bright, long-life illumination source with a host of other precision features, and you have a projector solution that’s perfectly suited to a diverse range of professional venues. HDMI 2.0 with HDCP 2.2 ports come as standard, as well as DisplayPort 1.2 with HDCP 2.2 for when you need Frame Sequential and Dual Pipe 3D.

Key Features:

• 10,500 ISO / 9,500 ANSI Lumens
• 0.67" WQXGA+ TRP UHD DMD
• 4K-UHD Resolution
• 10,000:1 Dynamic Contrast
• 20,000 Hours Illumination
• Multi-Axis Orientation

• 4K-UHD Displaywith Smooth Picture Processing:TheTRP UHD DMD systemcreates true 4K UHD resolution by using millions of tiny, individually controlled mirrors to reflect light and form an image, delivering detailed and vibrant pictures.

• Bright Laser Light Source:The Laser Phosphor light source produces10,500 ISO lumens (9,500 ANSI lumens) of brightness for over 20,000 hours of illumination.

• IP60 Sealed Optics:The optical system, from the laser light source up to the lens is completely sealed and can be considered IP60 rated. This ensures that light output and color performance will not be degraded due to the ingress of dust. Additionally, this projector is completely filterless as the system is liquid cooled and uses a radiator heat exchanger, minimizing maintenance as no replacement or cleaning of filters is necessary, and allowing unrestricted airflow.

• Projector Controller Software:Ideal for use in large installations or where projectors are in multiple locations in a building, the software can dramatically reduce the time required for setup and configuration, all from a single network-enabled PC.

• Multi-Axis Orientation:For maximum flexibility, the E-Vision Laser 11000 4K-UHD can be operated in both Portrait and Landscape mode, pointing up and down and every angle in between

• Edge Blendingwith Black Level Correction:Superbly capable edge blending and multi-projector tiling is provided by way of high bit depth processing that ensures a seamless, contiguous image can be created from multiple projectors.

• 3D Laser Projector:supports Frame Sequential and Dual Pipe formats.

• Image Correction Features:Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.

• Separate control of screen and source aspect ratio

• Optional Lenses andMotorized Lens Mount:Digital Projection offers 8 compatible lenses with throw ratios from 0.38:1 to 8.27:1. The lens mount provides motorized and programmable shift, zoom and focus. In addition, several Panasonic lenses also work with this projector (seeAccessoriestab).

• HDBaseT®:for transmission of uncompressed High Definition Video up to 328 feet (100 meters) from the source.

• TAA Compliant:Digital Projection is always pushing to innovate and improve the quality of their remarkable visual solutions. Toward that end, they are pleased to announce that most of their award-winning laser projectors are now TAA compliant.

• SPECS:

• Color System

  Laser Phosphor with enhanced color wheel

  Display Type

  1 x 0.665" WQXGA+ TRP UHD DMD™

  DMD Specification
  • Display resolutions 4K-UHD (3840 x 2160) or WQXGA+ (2716 x 1528)
  • 8.3 megapixels on screen at 4K-UHD
  • Fast transit pixels for smooth greyscale and improved contrast.
  Aspect Ratio

  16:9

  Fill Factor

  Not applicable: Smooth Picture DMD™

  KEY FEATURES

  Video & Graphics Processing

  • HDR processing
  • Two projectors in one: 4K-UHD and WQXGA+
  • DisplayPort 1.2 with HDCP 2.2
  • 2 x HDMI 2.0 with HDCP 2.2
  • 2 x HDMI 1.4b inputs with HDCP 1.4 for Dual Pipe processing and Frame Sequential 3D Format.
  • Sequential Processing: 3D via single HDMI 1.4b input
  • Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs
  • Synchronization of active glasses
  • 3G-SDI with loop-through
  • DICOM simulation mode

  Geometry Correction

  • Onboard 4-Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc, and Image Rotation
  • User-definable custom warp
  • Digital zoom, pan and scan.
  • Independent four boundary blanking control for custom input window sizing
  • Scaling available for fíxed aspect ratio screens.
  • Unscaled processing for pixel mapped display.

  Edge Blending

  • Blending control available for all sides with width control.
  • Correction for non-active pixels at the edge of the display.

  Picture in Picture

  • Two sources can be displayed simultaneously using 2D inputs with the original aspect ratios maintained

  HDBaseT® Interface

  • Built-in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100 m from the source with low cost cabling.

  • Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4

  Color Processing

  • Four color modes available: ColorMax / Manual Color Matching / Color Temperature /
  • Gains and Lifts
  • Powerful seven point color correction for accurate color matching with presets
  • Easy color temperature selection
  • Manual seven point color adjustment
  • Traditional lifts and gains

  ProjectorController Software

  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status

  Projector Automation

  • Real-time clock provides daily on/off automation
  • E-mail alerts for system status
  Source Compatibility
  • 2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT(4:2:0) and DisplayPort inputs.
  • 3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
  • 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.

  WQXGA+ mode

  • 2D sources up to WQXGA+ at 120 Hz can be displayed scaled to fit WQXGA+.
  • 3D sources up to WQXGA at 120 Hz can be displayed scaled to fit WQXGA+.

  4K-UHD mode

  • 2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD.

  Auto mode

  • Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
  • Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.
  INPUTS/OUTPUTS

  Video & Computer

  • DisplayPort 1.2 (2D) x 1
  • HDMI 1.4b (3D) x 2
  • HDMI 2.0 (2D) x 2
  • 3G-SDI in (2D) x 1
  • 3G-SDI out x 1
  • HDBaseT (see LAN) (2D) x 1

  Communication & Control

  • 3D Sync Out x 1
  • 3D Sync In x 1
  • LAN x 2
  • RS232 x 1
  • Wired Remote x 1
  • 12V Trigger x 2
  • 3D Sync IR Out x 1

  Note:One of the LAN ports is shared with HDBase-T.

  3D Formats Supported
  • Frame Sequential
  • Dual-Pipe
  HDTV Formats Supported1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz, 100Hz, 120Hz)
  1080i (50Hz, 60Hz)
  720p (50, 60Hz)
  2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
  4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)Computer Compatibility2D
  4K-UHD up to 60 Hz.
  WQXGA+ up to 120 Hz.
  3D
  Supported formats will be displayed within WQXGA+.Bandwidth498 megapixels per second via DisplayPort and HDMI 2.0.Remote ControlAddressable IR remote control, wireless and wired.
  On-Board keypadAutomation Control
  • Crestron RoomView® Connected
  • PJLink Class 1
  • LAN
  • RS232
  • AMX (Device Discovery)
  • Served web pages (projector status, projector control, Crestron RoomView®, network settings, alert mail setup, time setup, error log, On Screen Display)
  Operation24x7 operationillumination TypeLaser Light SourceTypical illumination Life20,000 hoursLenses112-499 Fixed LensThrow Ratio 0.76:1112-500 Zoom LensThrow Ratio 1.24:1-1.78:1112-501 Zoom LensThrow Ratio 1.71:1-2.25:1112-502 Zoom LensThrow Ratio 2.20:1-3.67:1112-503 Zoom LensThrow Ratio 3.54:1-5.36:1112-504 Zoom LensThrow Ratio 5.24:1-8.27:1115-339 Zoom LensThrow Ratio 0.74:1-0.93:1117-341 Fixed LensThrow Ratio 0.38:1PLUS ALL LEGACY PANASONIC LENSESLens Mount
  • Motorized and programmable shift, zoom and focus.
  • Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
  Mechanical Mounting
  • Front/Rear Table
  • Front/Rear Ceiling
  • Adjustable Front/Rear Feet
  Orientation
  • Table Top or Inverted:Yes
  • Pointing Up: Yes
  • Pointing Down: Yes
  • Roll (Portrait): Yes
  Power Requirements200–240 V AC 50/60 Hz single phase 6.6A
  100–130 V AC 50/60 Hz single phase 14.0A. (Note that in 100–130 V AC operation, the projector will be at 80% brightness.)Power Consumption

  1080 W at 110 V
  1290 W typical at 240 V, 50 Hz

  Thermal DissipationTypical 3685 BTU/Hour at 100 V AC
  Typical 4406 BTU/Hour at 240 V ACFan NoiseSmooth Picture On:
  Normal mode: typical 43 (max 45) dBA
  Eco mode: typical 39 (max 41) dBA
  Smooth Picture Off:
  Normal mode: typical 42 (max 44) dBA
  Eco mode: typical 38 (max 40) dBATemperatureOperating: 41°F to 104°F (5° to 40°C)
  Storage: 14°F to 140°F (-10°C to 60°C)Operating Humidity10 to 85% non-condensing (with maximum temperature of 104°F/40°C )Weight (chassis only)68.34 lb (31 kg)Dimensions (LxWxH)23.55" x 19.68" x 8.60" (598 x 500 x 219 mm)Safety & EMC RegulationsUL/cUL, BIS, CB, CCC, CQC Eco label, CECP, KC, KTL, IC,BSMI, RoHS (China), RoHS (EU),FCC Class A, FDA,CE, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 2, WEEE (EU), PSE, UKCA

HOURE-Vision Laser 11000 4K-Digital Projection E-Vision Laser 11000 4K-UHD