More features

[TEXTURED/SMOOTH DESIGN]: Compared with the only smooth or textured surface, the Textured/Smooth design can meet different printing needs. Among them, the matte texture makes it easier for the printing material to adhere to the surface of PEI, and the printing effect of the smooth surface is more delicate.

[DIRECTLY TO USE]: No glue, no tap and other fixed ways, when hotbed temperature reaches 60℃ ,materials such as PLA ABS will stick well, and after printing, when PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.

Flexible, removable, high strength and heat resistance, double-layer design, thicker and more durable. And compatible with PLA, ABS, ASA, PETG, TPU, PC, PA, and more. When printing PLA filaments, the temperature of the hot bed is set at 60°C, and PETG needs to be set at 80-85°C. Note: The adaptation temperature of different materials is different, please adjust it reasonably.

[NOTICE]: Both sides of the double sided PEI coating are printable by simply placing it on the heated bed, removing the protective film, and printing directly. Occasionally you can see bubbles between the PEI film and the stainless steel plate, which does not affect the use. Size: 500 x 500mm / 19.69 x 19.69inch.

[PRACTICAL FEATURES]: PEI is a superior build surface material that offers a range of over traditional PEO/PET. It's more to high temperatures and wear, and provides better adhesion. Achieve excellent adhesion at around 60℃ bed temperature, no warping. Because the thickness of the product itself must be re-leveling after attaching this item to avoid damage the surface.