ENGiNDOT
The UPGRADED MULTI-FUNCTION CABLE TESTER NETWORKING TOOL
The 2021 upgraded digital signal is free from interference, which is stronger and more stable than analog signal.
General Technical Indicators
· ▲ Temperature range:
Operating temperature: 0 ~ 40℃, maximum relative humidity of 80% (non-condensing).
Storage temperature: -10 ~ 50℃, maximum relative humidity of 80% (non-condensing, no battery)
· ▲ Altitude: ＜2000m (meters)
· ▲ Explosion-proof type: IP 40
· ▲ Transmission signal distance: ＞ 300m
· ▲ Battery: Transmitter 6F 22/9V × 1; Receiver 6F 22/9V × 1
· ▲ Dimensions:
Transmitter 135mm × 68mm × 37mm
Receiver 192mm × 45mm × 33mm
Maintain
Unless you are an maintenance person with relevant testing experience, otherwise do not try to repair the meter by yourself.
Use a damp cloth and a small amount of detergent to clean the case of the meter regularly. Do not use abrasives or chemical solvents.
【UPGRADED DIGITAL SIGNAL 】 - The upgraded digital signal is free from interference, which is stronger and more stable than analog signal. Fast to locate the breakpoint without damaging wire's skin. The Ethernet line finder is easy to track buried and hidden wires. Perfect for tracking RJ11, RJ45, cables or other metal wire.
【NETWORK & TELEPHONE LINE TEST】- The cable tester can detect the physical connection status of the network cable, such as open circuit, short circuit, reverse connection, etc. Using the emitter to test the working status of TIP, RING line, and the positive/negative polarity of line level.
【WIRE TRACKING】 - The wire tracker can trace Ethernet LAN wires and electrical wires. Note: The wires must be power-off. It is recommended to separate some wires while using clip connections and then select "Scan". If the "Scan" indicator is on, emitter works properly, and you can use the receiver to find the target wire.
【EARPHONES DESIGN】 - The ENGINDOT CT03 Pro cable tester comes with a pair of earphones, which can receive information in a noisy environment. Notice that if the sound is low, please check the battery. The LED flashlight makes it easier to operate in the dark.
【PACKAGE CONTENT】 - 1* Receiver, 1* Transmitter, 1* RJ11 Converter Interface, 1* RJ45 Converter Interface, 1* Earphone, 1* Carrying Case, 1* User Manual, 2* 9V batteries.
【UPGRADED DIGITAL SIGNAL 】 - The upgraded digital signal is free from interference, which is stronger and more stable than analog signal. Fast to locate the breakpoint without damaging wire's skin. The Ethernet line finder is easy to track buried and hidden wires. Perfect for tracking RJ11, RJ45, cables or other metal wire.【NETWORK & TELEPHONE LINE TEST】- The cable tester can detect the physical connection status of the network cable, such as open circuit, short circuit, reverse connection, etc. Using the emitter to test the working status of TIP, RING line, and the positive/negative polarity of line level.【WIRE TRACKING】 - The wire tracker can trace Ethernet LAN wires and electrical wires. Note: The wires must be power-off. It is recommended to separate some wires while using clip connections and then select "Scan". If the "Scan" indicator is on, emitter works properly, and you can use the receiver to find the target wire.【EARPHONES DESIGN】 - The ENGINDOT CT03 Pro cable tester comes with a pair of earphones, which can receive information in a noisy environment. Notice that if the sound is low, please check the battery. The LED flashlight makes it easier to operate in the dark.【PACKAGE CONTENT】 - 1* Receiver, 1* Transmitter, 1* RJ11 Converter Interface, 1* RJ45 Converter Interface, 1* Earphone, 1* Carrying Case, 1* User Manual, 2* 9V batteries.
