Default power supply: 12V 5A AC/DC adapter, 100-240V wide voltage, US standard plug. If you require a different power plug standard, please contact customer service.Description:
Material: Copper
Heat Dissipation Power: 400W±5%
Pump Type: Centrifugal pump
Product Size: 225mm*159mm*90mm (Length * Width * Height)
Chassis Color: Black
Interface Type: G1/4 thread
Fan Speed: 2200 RPM
Working Temperature: -15~60℃
Sealing: 0.2Mpa
Design Life: 30000 hours
Weight: About 6.2KG
Features:
Supports high power heat dissipation of 600W and 2200RPM fan.
The case adopts honeycomb heat dissipation process to better discharge heat. Independent temperature digital display, precise temperature control, simple and intuitive.
The inlet and outlet is standard G1/4 thread, which can be connected with various specifications of the liquid pipe. Compact size, suitable for all kinds of small volume cooling system.
Attention to buyer:
The after-sales guarantee period for the product is seven days. If there are any problems or questions, please contact us. Timed out will cancel this service.
Tip:
In order to create a good heat dissipation system after the installation of water cooling loop, please follow the following instructions before adding water cooling liquid:
1. When filling the water-cooled liquid, it is necessary to start the pump power repeatedly for several times. This repeated switching action can facilitate the water cooling liquid into the loop, and the air out.
2.do not make the pump idle! If there is no water cooling liquid, turn off the water cooling pump power immediately to avoid water pump damage.
3. Injecting water cooling liquid from the top cover of the water tank can reduce the probability of air entering the pump and prolong the service life of the pump.
4. In order to exhaust smoothly, slightly inclined system can be discharged in the air.
5. When testing whether there is water leakage, please place toilet paper or towel at the joint of the pipe joint to confirm the water leakage.
6. After water injection is completed, please open the screw on the water injection port above the water tank and let the water cooling loop circulate continuously for 24 hours, which can effectively discharge the gas from the water cooling system.
