You are purchasing an AMD Radeon Pro V620 graphics card. The card has a custom ABS plastic front plate/ shroud and has been modified to have an integrated blowing fan for cooling. The the thermal pad on the processor has been replaced with PTM7950. The PTM7950 shown in the image is not part of the sale. Each card is tested and thermally cycled 5 times after modification.
A fan header has been installed on the board and an extension cable has been plugged into it. The on-board fan header does not offer PWM control and is always at 100%. I am also including an adapter that will allow you to plug the fan into any other standard fan header. This allows you to choose whether to plug the fan into the header on-board the gpu, or to plug it into any other standard fan header with PWM control. You would still need to set that up properly with software if you choose to go the PWM route.
Width of the card with the mod installed comes in at 40.5mm. However, the center of the fan protrudes about 1mm, making the width at that spot 41.5mm. It still fits in a double slot.
Original front plates and accessories are included in case you'd like to convert your GPU back to stock.