Printium Glow in the Dark DTF Film – 23.6" × 328 ft (60cm × 100m) | Photoluminescent | Cold Peel | Cotton Polyester PRINTIUM ✦ Specialty DTF Film · Glow in the Dark · Photoluminescent Glow in the Dark DTF Film
23.6" × 328 ft (60 cm × 100 m) · Cold Peel
Prints that look professional by day and glow neon-green at night. Photoluminescent coating built into the film — no specialty inks needed. Use your standard CMYK + White DTF setup and let the film do the rest.
328ft (100 m) · Roll Length 23.6" Width (60 cm) Cold Peel Release 100% 5-Star Reviews Neon Green Glow Photoluminescent Standard Inks No Specialty Ink 300–320°F Press Temp Cold Peel Release Type All Fabrics Compatible Why Choose This Film The Glow Is in the Film — Not the Ink
01 Photoluminescent Coating
Advanced photoluminescent crystals embedded in the film's coating absorb natural or artificial light and store it for later release. In dark environments, printed areas emit a soft, vivid neon-green glow — the effect lasts for several hours depending on how long the garment was exposed to light.
02 No Specialty Inks Required
The glow effect is in the film, not the ink. Use your standard CMYK + White DTF inks exactly as you would with regular film. No line flushing, no ink switching, no reconfiguring your RIP. White-ink areas glow the brightest; CMYK-colored areas emit a luminous tinted glow.
03 Precision Ink Absorption
Specialized top-coating holds ink droplets with extreme precision — no bleeding, no pooling, even under a dense white underbase. Fine lines, small text, and intricate artwork remain sharp and legible both day and night.
04 Soft-Hand, Durable Transfer
Despite the specialty coating, the film produces thin, flexible transfers that move naturally with the fabric. No stiff or "plastic" hand feel. Resistant to cracking and peeling through dozens of laundry cycles without losing photoluminescent properties.
05 Gang Sheet Efficiency
23.6" (60 cm) wide — the professional standard for wide-format DTF machines. Gang multiple chest logos or large back-prints side-by-side in a single pass. 328 ft (100 m) roll length means long, uninterrupted production runs with minimal roll changes.
06 Premium Market Applications
Command higher prices for specialty "special effects" printing. Perfect for festival and clubbing apparel, children's nightwear, safety-themed workwear for night shifts, athletic gear, and streetwear drops where standing out is the point.
Technical Details Full Specifications SpecificationDetail Product NamePrintium Glow in the Dark DTF Film BrandPRINTIUM Roll Size23.6" × 328 ft (60 cm × 100 m) Film TypeSingle-side printable DTF film with photoluminescent coating Glow ColorNeon Green (photoluminescent emission) Glow DurationSeveral hours after light exposure (intensity varies by charge time) Peel TypeCold Peel — wait 8–10 seconds after pressing before peeling Press Temperature300–320°F (149–160°C) Press Time8–12 seconds (depends on fabric type) Ink CompatibilityAll water-based DTF inks (standard CMYK + White) — no specialty ink required Powder CompatibilityStandard DTF adhesive powders (fine and medium grain) Fabric CompatibilityCotton, Polyester, Nylon, Spandex, Blended fabrics Compatible ApplicationsAutomatic powder shakers and dryers — no special equipment needed Storage ConditionsCool, dry place away from direct sunlight. Keep sealed in original packaging. ConditionNew SKUPR-DFIL-003F Instructions How to Use
- 1 Print Your Design
Load the film into your DTF printer, printable side facing the printheads. Print your design using standard water-based DTF inks (CMYK + White). No changes to your ink setup are needed — the glow effect is in the film coating, not the ink.
- 2 Apply Adhesive Powder
While the ink is still wet, apply DTF adhesive powder evenly over the printed design. Shake off excess. The film's coating ensures powder bonds only to ink-covered areas — no stray speckling on unprinted zones.
- 3 Cure the Design
Pass the film through your DTF dryer or curing oven until the powder is fully melted. The photoluminescent coating is heat-stable and will not be affected by standard curing temperatures.
- 4 Heat Press onto Garment
Position the cured film on the garment, printed side down. Press at 300–320°F (149–160°C) for 8–12 seconds at medium pressure. Even pressure is critical for consistent glow activation across the full design area.
- 5 Cold Peel
After pressing, wait 8–10 seconds for the transfer to cool slightly before peeling. Peel the carrier film slowly and evenly for a clean, complete release. Do not hot peel — allow the brief cooling period for best results.
- 6 Store Unused Film Correctly
Reseal unused film in its original packaging immediately. Store in a cool, dry location away from direct sunlight and UV sources. Do not bend, crease, or apply pressure to stored rolls. Keep away from high humidity and extreme temperatures.
Questions & Answers Frequently Asked Questions Do I need special inks or powder for this film to glow? No. The glow effect is built into the film's photoluminescent coating — not the ink or powder. Use your standard water-based CMYK + White DTF inks and regular adhesive powder exactly as you would with any standard DTF film. No line flushing, no ink switching, no changes to your RIP settings are required. How does the glow effect work and how long does it last? The film's photoluminescent coating contains crystals that absorb light energy when exposed to sunlight or strong artificial lighting and release it as a neon-green glow in dark environments. The glow can last for several hours after a sufficient charge. Brighter light sources and longer exposure times produce stronger, longer-lasting glow. White ink areas glow the brightest; CMYK-printed areas emit a luminous, tinted version of the glow. Why is this a cold peel film? The photoluminescent coating requires a brief cooling period after pressing for the adhesive bond to fully set before the carrier film is removed. Wait 8–10 seconds after the heat press opens, then peel slowly and evenly. Peeling while still very hot risks incomplete transfer or uneven release at the design edges. What fabrics can I apply this film to? The film works on cotton, polyester, nylon, spandex, and blended fabrics — the same range as standard DTF film. The photoluminescent coating remains flexible after pressing, so it does not crack on stretchy materials like spandex or tight-fit athletic wear. Will the glow effect fade after washing? When pressed at the correct temperature and pressure, the transfer creates a durable bond that is highly resistant to washing. The photoluminescent properties are retained through dozens of laundry cycles. For best results, wash the garment inside out in cold water and tumble dry on low. Avoid bleach or harsh chemical detergents that could degrade the coating over time. What are the best use cases for glow-in-the-dark DTF transfers? This film is ideal for: festival and clubbing apparel where designs glow under black lights and in the dark; children's sleepwear and pajamas with fun, interactive glow elements; safety workwear for night shift workers, cyclists, and outdoor recreational gear; and limited-edition streetwear drops where specialty effects justify premium pricing. It is also effective for event merchandise, team uniforms for evening sports, and promotional items that need to stand out. Specialty Film Range Which Specialty Film Is Right for You?
Film Effect Press Temp Press Time Peel Best For ✨ Glitter Sparkling shimmer · multi-color 300–320°F 8–12 sec Cold Dancewear, cheer, holiday, kids 🟡 Gold High-brilliance metallic gold foil 284–302°F 8–10 sec Cold (full cool) Luxury branding, streetwear, events ⚪ Silver Chrome / metallic silver foil 284–302°F 8–10 sec Cold (full cool) Sportswear, tech branding, fashion 🌙 Glow in the Dark Neon green photoluminescent glow 300–320°F 8–12 sec Cold (8–10 sec) Festival, safety, kids, streetwear
Order with Confidence
Professional specialty DTF film — same day shipping available on qualifying orders.
✓ Genuine Brand 328 ft Per Roll Neon Glow Effect 100% 5-Star Reviews DTFBANK × PRINTIUM
