HPE DL365 DL385 Gen10 Plus/V2 OCP Upgrade Cable Kit Expand OCP3 to x16This listing is for one OCP Upgrade Cable KitThe kit contains TWO cables, you will use only one per serverExpands OCP3 slot bandwidth to x16 PCI-e 4.0Uses onboard NVMe connector to connect to OCP3Works with the following serversHPE Proliant DL365 Gen10 PlusHPE Proliant DL385 Gen10 PlusHPE Proliant DL385 Gen10 Plus V2Please contact us with any questionsThank youASLOC:OFC-ST-R14-S3OFC-ST-R15-S3This listing is for one HPE P51911-B21 DL300 Gen11 CPU1 to OCP2 x8 Enablement Kit
Notes for DL360:− For 2 SFF U.3 drive cage selection in 1 Processor configuration: o If 2 SFF Drive cage is connected to Direct Attach (without Internal controller and 2 SFF cable) and NVMe drive is selected, then "CPU1 to OCP2 x8" and "OCP1 x16" OCP upgrade kit cannot be selected.− To be defaulted in the configurator if 1 Processor is selected. Customer is allowed to remove if OCP card is not selected.− If no OCP enablement kit is selected, then x16 OCP cannot be selected. − "CPU1 to OCP2 x8" and "CPU1 to OCP1 x16" cannot be selected together.− "CPU1 to OCP2 x8" cannot be selected if 2 Processor is selected. − If 8 SFF x4 and 2 SFF Drive cages are selected without controller, then "CPU1 to OCP1 x16" and "CPU1 to OCP2 x8" cannot be selected.− Not available for 20EDSFF CTO Server.
Notes for DL380:− If 24NVMe Bundle is selected, then Qty 1 of HPE DL300 Gen11 CPU1 OCP2 x8 Enable kit (P51911B21) must be selected and defaulted.
Please contact us with any questions
Thank you
LOC:OFC-ST-R11-S3