WORLDWIDE SHIPPING
Genuine HPE 1.92TB SATA 6Gb/s Read Intensive SFF Multi Vendor SSD, HPE option part number P40499-B21. This is a 2.5-inch SFF enterprise SATA SSD supplied with an HPE Basic Carrier (BC) and intended for supported HPE ProLiant server configurations. HPE officially identifies the product as a 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD.
The corresponding HPE spare/service part number is P41524-001. HPE PartSurfer maps P40499-B21 directly to P41524-001 with the description “SPS-DRV SSD 1.92TB SFF SATA RI MV BC.”
Product SpecificationsBrand: HPEOption Part Number: P40499-B21Spare Part Number: P41524-001Assembly Part Number: P41080-001Capacity: 1.92TBDrive Type: Enterprise Solid State DriveInterface: SATA 6Gb/sForm Factor: 2.5" SFFCarrier: HPE Basic Carrier (BC)Workload: Read Intensive (RI)NAND: Multi Vendor / TLC-based qualified drivesHot Swap: YesSector/Interface: SATACondition: NEW BULK
HPE's official product listing confirms the 1.92TB capacity, SATA interface, Read Intensive classification, SFF form factor and Basic Carrier configuration.
Part Number Identification
P40499-B21 is the HPE option/ordering part number for this 1.92TB SATA 6G Read Intensive SFF Basic Carrier Multi Vendor SSD.
P41524-001 is the corresponding HPE spare/service part number. HPE PartSurfer directly associates these two numbers.
The important distinction is:
P40499-B21 = HPE option/ordering numberP41524-001 = HPE spare/service numberP41080-001 = HPE assembly number
Because this is a Multi-Vendor SSD, HPE can qualify drives from different underlying manufacturers under the same HPE option/spare numbers. Therefore, I would not advertise a specific Samsung, Kioxia, Micron, etc. model unless it is confirmed from the physical drive label.
Compatibility
HPE lists this drive for supported ProLiant systems equipped with compatible 2.5-inch SFF SATA drive bays.
HPE documentation lists P41524-001 among the supported 1.92TB SFF SATA Read Intensive drives for systems including the HPE ProLiant DL360 Gen10.
The P40499-B21 BC-carrier configuration is associated with supported HPE Gen10 Plus, Gen11 and Gen12 ProLiant platforms, including models such as:
ProLiant DL20 Gen10 PlusProLiant DL325 Gen10 Plus v2ProLiant DL345 Gen10 PlusProLiant DL360 Gen10 PlusProLiant DL365 Gen10 PlusProLiant DL380 Gen10 PlusProLiant DL385 Gen10 PlusProLiant DL320 Gen11ProLiant DL325 Gen11ProLiant DL345 Gen11ProLiant DL360 Gen11ProLiant DL365 Gen11ProLiant DL380 Gen11ProLiant DL385 Gen11ProLiant ML350 Gen11
Exact compatibility depends on the server's drive backplane, controller and carrier configuration.
Package Contents1 × HPE P40499-B21 / P41524-001 1.92TB SATA SSDHPE Basic Carrier (BC), if supplied with the physical unit
NEW BULK condition: Packaging may be bulk/non-retail packaging rather than the original HPE retail box.
Why Buy From Us?Genuine HPE enterprise SSDExact P40499-B21 option numberP41524-001 HPE spare number1.92TB capacitySATA 6Gb/s interfaceRead Intensive enterprise workload2.5" SFF form factorHPE Basic Carrier configurationNEW BULK condition
Important Information
This is a SATA SSD, not SAS and not NVMe. HPE specifies a 6Gb/s SATA interface for P40499-B21.
This is also a Multi Vendor SSD. HPE's Multi Vendor program means the underlying SSD manufacturer/model can vary while still meeting HPE's qualified specifications. Do not assume a specific OEM model unless it is visible on the drive label.
SED: P40499-B21 is not the HPE self-encrypting version. HPE's current QuickSpecs separately identifies the self-encrypting SATA SSDs with different part numbers, such as P58236-B21, while P40499-B21 is explicitly listed as Multi Vendor SSD.
Verified Identification: HPE P40499-B21 = P41524-001, 1.92TB SATA 6Gb/s Read Intensive 2.5" SFF Basic Carrier Multi Vendor SSD