USB 3.2 Data Transfer: The USB-C hub utilizes USB 3.2 Gen 2 with a high-speed transfer rate of 10Gbps. It is backward compatible with USB 3.0, the next-generation USB standard theoretically offering double the data transfer rate of traditional USB 3.0. The 4 USB-A ports share a 10Gbps transfer speed. Please note that the hub does not support charging devices.

Easy to Carry: This hub is lightweight and slim, measuring 10.2 x 3.3 x 1.4cm and weighing only 44g, making it easy to carry in a laptop bag or briefcase.

Wide Compatibility: Compatible with Windows 10/8/7, Mac OS, and Linux. This hub supports hot-swapping and requires no driver installation.

Packing List: 1 x Inateck USB C 3.2 Hub; 1 x User Manual.

This hub adopts USB 3.2 Gen 2, the new generation of USB standard, twice the data transmission rate of conventional USB 3.0 in theory. The hub supports the new generation of NVMe SSD and U disk.

Transform one of your computer’s USB ports into 4 with this hub. The 4 ports share 10Gbps transmission speed. Please note that the hub does not support charging.

Comes with a 50cm cable, the hub can also be connected to your desktop easily.

Compact and light, easy to carry it along.

Adapted to Windows 11/10/8/7, macOS, and Linux. Hot swappable, no driver needed.

Inateck HB2025A adopts the newest USB standard - USB 3.2 Gen 2.

Most hubs on the market adopt USB 3.0 protocol, which has been used for 10 years. Up to 10Gbps, our hub is theoretically twice as fast as its similar products in transmission speed.

The hub is compact, convenient to take.

Compatible with Windows 10/8/7, Mac OS, and Linux. Hot swap supported.

Comes with a 50cm cable, the hub can be connected not only to your laptop but also to your desktop easily.

As is known, a working USB 3.0 device will affect the wireless signal around it, such as 2.4GHz and Bluetooth signal of wireless mouses, and WIFI. Unfortunately this phenomenon also exists on USB 3.2 devices, which has been proved in our tests. The underlying cause of the interference is the interaction between wireless signals of different protocols. We understand customers’ pain and have been making all kinds of efforts to solve this problem, though the result turns out to be unsatisfactory. Nevertheless, we still find some ways to mitigate interference.

• To insert wireless adapters into the USB ports of computer and leave the hub ports for other devices
• To insert wireless adapters into USB 2.0 ports or apply USB extension cables.
• To keep wireless adapters and routers away from working USB 3.0 devices, as far as possible
• To use 5G frequency on WIFI, instead of 2.4G

• Please let us know if the transmission speed is still unsatisfactory when the USB port on your computer, your cable and the connected device all support USB 3.2 Gen 2.

1. Not all USB-C ports support USB 3.2 Gen 2. The fact is that most of USB-C ports only support USB 3.1 Gen 1, whose transmission speed equals that of USB 3.0.
2. We notice that some manufacturers wrongly mark the information on the USB ports. Please carefully distinguish.
3. Some cables are boasted to support 10Gbps transmission though they support 5Gbps actually. Please carefully distinguish.

• The same as all other hubs, the ports on this hub share bandwidth, which will be reflected in the transmission speed of the connected devices.

• Indeed the hub does not support charging as it is powered by computer with the current being 5V/0.5-1.5A only.
• We plan to develop the hubs that support charging. In that case they need extra power adapters.

• The current of the hub comes from computer’s host port. Generally speaking, a USB 3.2 Gen 2 Type-C port outputs 5V/3A current maximum. Some computer ports might output 5V/1.5A or 5V/0.9A current.
• The working current of an NVMe SSD is 3.3V/1-3A, which varies depending on SSD brands and capacity. To ensure a good effect, please do not connect more than 2 SSDs to the hub.
• The working current of a 2.5 inch SATA hard drive is 5V/1-1.5A, which also varies depending on brand and capacity. Thus, please do not connect more than two 2.5 inch hard drives to the hub.

• Computer Peripherals
  • Hard Drive Accessories
    • Hard Drive Enclosures
    • Hard Drive Docking Station
    • Hard Drive Mounting Kit
    • Hard Drive Adapter / Converter
    • Hard Drive Protective Cases
  • Computer Accessories
• Laptop Sleeve Bag-new
  • Edgekeeper® Series
    • Ultra-Thin Series
    • Hard Shell Sleeve
    • Accessory Pouch
  • Tablet Keyboards-NEW
    • iPad Keyboard
      • For 10.2-10.5-inch iPad
      • For iPad Air
      • For 11-12.9-inch iPad Pro
    • Surface Keyboard
      • For Surface GO
      • For Surface Pro
  • Barcode Scanners
    • 1D Barcode Scanners
      • 2.4G Barcode Scanners
      • USB Wired Barcode Scanners
    • 2D Barcode Scanners
      • 2.4G Barcode Scanners
      • USB Wired Barcode Scanners
    • Barcode Scanner Stands
  • Lamps & Lights
    • Floor Lamps
    • Desk Lamps
    • Table Lamps
    • Ceiling Lights
  • Indoors & Outdoors
    • Indoors
      • Air Fryer
    • Office Supplies
      • iPad Case
      • USB Charger
  • SALE
  • 4-Port USB-C Hub: This hub expands a single USB-C port on the host device into four USB 3.2 type-A ports. The cable length is 1.6ft, making it easy to connect with various devices such as desktop computers.

    USB 3.2 Data Transfer: The USB-C hub utilizes USB 3.2 Gen 2 with a high-speed transfer rate of 10Gbps. It is backward compatible with USB 3.0, the next-generation USB standard theoretically offering double the data transfer rate of traditional USB 3.0. The 4 USB-A ports share a 10Gbps transfer speed. Please note that the hub does not support charging devices.

    Easy to Carry: This hub is lightweight and slim, measuring 10.2 x 3.3 x 1.4cm and weighing only 44g, making it easy to carry in a laptop bag or briefcase.

    Wide Compatibility: Compatible with Windows 10/8/7, Mac OS, and Linux. This hub supports hot-swapping and requires no driver installation.

    Packing List: 1 x Inateck USB C 3.2 Hub; 1 x User Manual.

    Inateck HB2025 10G USB-C-Hub
    • This hub adopts USB 3.2 Gen 2, the new generation of USB standard, twice the data transmission rate of conventional USB 3.0 in theory. The hub supports the new generation of NVMe SSD and U disk.
    • Transform one of your computer’s USB ports into 4 with this hub. The 4 ports share 10Gbps transmission speed. Please note that the hub does not support charging.
    • Comes with a 50cm cable, the hub can also be connected to your desktop easily.
    • Compact and light, easy to carry it along.
    • Adapted to Windows 11/10/8/7, macOS, and Linux. Hot swappable, no driver needed.
    BrandInateckHardware InterfaceSolid State Drive, USB, USB 3.2 Gen 2Number of Ports4Compatible DevicesLaptops, DesktopsOperating SystemWindows 8, Windows 7, Mac OS, Windows 10/11
    2x the Transmission Rate of USB 3.0

    Inateck HB2025A adopts the newest USB standard - USB 3.2 Gen 2.

    Most hubs on the market adopt USB 3.0 protocol, which has been used for 10 years. Up to 10Gbps, our hub is theoretically twice as fast as its similar products in transmission speed.

    Compact and Portable

    The hub is compact, convenient to take.

    Widely Compatible, Plug and Play

    Compatible with Windows 10/8/7, Mac OS, and Linux. Hot swap supported.

    Multi-scenario Application

    Comes with a 50cm cable, the hub can be connected not only to your laptop but also to your desktop easily.

    About Interference

    As is known, a working USB 3.0 device will affect the wireless signal around it, such as 2.4GHz and Bluetooth signal of wireless mouses, and WIFI. Unfortunately this phenomenon also exists on USB 3.2 devices, which has been proved in our tests. The underlying cause of the interference is the interaction between wireless signals of different protocols. We understand customers’ pain and have been making all kinds of efforts to solve this problem, though the result turns out to be unsatisfactory. Nevertheless, we still find some ways to mitigate interference.

    • To insert wireless adapters into the USB ports of computer and leave the hub ports for other devices
    • To insert wireless adapters into USB 2.0 ports or apply USB extension cables.
    • To keep wireless adapters and routers away from working USB 3.0 devices, as far as possible
    • To use 5G frequency on WIFI, instead of 2.4G
    Cannot reach 10Gbps speed?
    • Please let us know if the transmission speed is still unsatisfactory when the USB port on your computer, your cable and the connected device all support USB 3.2 Gen 2.
    1. Not all USB-C ports support USB 3.2 Gen 2. The fact is that most of USB-C ports only support USB 3.1 Gen 1, whose transmission speed equals that of USB 3.0.
    2. We notice that some manufacturers wrongly mark the information on the USB ports. Please carefully distinguish.
    3. Some cables are boasted to support 10Gbps transmission though they support 5Gbps actually. Please carefully distinguish.
    • The same as all other hubs, the ports on this hub share bandwidth, which will be reflected in the transmission speed of the connected devices.
    Cannot charge?
    • Indeed the hub does not support charging as it is powered by computer with the current being 5V/0.5-1.5A only.
    • We plan to develop the hubs that support charging. In that case they need extra power adapters.
    Can I connect multiple hard drives to a computer by using this hub?
    • The current of the hub comes from computer’s host port. Generally speaking, a USB 3.2 Gen 2 Type-C port outputs 5V/3A current maximum. Some computer ports might output 5V/1.5A or 5V/0.9A current.
    • The working current of an NVMe SSD is 3.3V/1-3A, which varies depending on SSD brands and capacity. To ensure a good effect, please do not connect more than 2 SSDs to the hub.
    • The working current of a 2.5 inch SATA hard drive is 5V/1-1.5A, which also varies depending on brand and capacity. Thus, please do not connect more than two 2.5 inch hard drives to the hub.