This was part of an Amazon liquidation pallet. Open box item, looks to be in new/unused condition with no marks. I don't have a good way of testing this but is guarantee to work.
For reference, a search of the label online gives the following info-
Outdoor IK10 IP67 IEEE 802.3bt (4PPoE) Gigabit PoE++ Injector 60WOne 60 W Port, IEEE 802.3bt (4PPoE) Compliant, IP67 Waterproof, IK10 Vandalproof, Metal Housing
SKU: 561785 IPI-OD60G

• Outdoor Gigabit PoE++ Injector - 60 W for an IEEE 802.3bt Powered Device - The Intellinet Network Solutions Outdoor Vandalproof Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 60 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.
• Hardened design for outdoor and industrial use - This PoE++ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -40 to 75°C (-40 to 167°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that, it has rating for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).
• Reduced wiring costs - There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its two-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use the existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).
• Safe protection for your expensive network equipment - The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.
• Wall-mount option - For full installation flexibility indoors or outdoors, you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.

• Power over Ethernet with output up to 60 watts
• IP67-rated, dustproof and waterproof
• IK10-rated, vandal-proof
• Suitable for extreme operating temperatures of -40 to 75ºC (-40 to 167ºF)
• Compatible with IEEE 802.3bt/at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more
• Supports 10/100/1000 Mbps data rates
• Distance support: up to 100 m (328 ft.)
• Auto-sensing PoE awareness to ensure that power is only sent to IEEE 802.3bt/at/af-compliant devices; non-PoE devices only receive data
• Short-circuit, overload and high-voltage protection
• Grounding point to protect equipment from external electrical surges
• Port surge protection up to 6 kV
• ESD protection up to 8 kV (air) and 6 kV (contact)
• Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6)
• Mounting holes for wall mounting
• Earthing kit included
• Saves time and money by delivering data and power via existing network cables
• Plug-and-play installation; no configuration required
• Fully 802.3af (Power over Ethernet)
• IEEE 802.3at (High-Power PoE+ Power over Ethernet)
• IEEE 802.3bt (PoE++/4PPoE Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3ab (1000BASE-T Gigabit Ethernet)

GeneralMedia support:

• - 10Base-T Cat5e/6/6a UTP/STP RJ45
• - 100Base-TX Cat5e/6/6a UTP/STP RJ45
• - 1000Base-T Cat5e/6/6a UTP/STP RJ45

Ports:

• - One RJ45 Gigabit data input port
• - One 2-pin terminal block power input port
• - One RJ45 PoE power + Gigabit data output port

MTBF: 411,808 hoursCertifications: FCC Class A, CE, RoHS, UKCA, NDAA
Electrical

• DC input: 24.0 - 56.0 V DC, 3.05 A max.; 2-pin terminal block
• DC output: 60.0 W, 55.0 V DC, 1.2 A max.; RJ45 PoE port
• Power consumption: 72.0 W (max.)

PoE Pinout (Mode A)

• - Pin 1: DC (-)
• - Pin 2: DC (-)
• - Pin 3: DC (+)
• - Pin 6: DC (+)
• - Pin 7: DC (-)
• - Pin 8: DC (-)

LEDs

• Power (PWR, green) and PoE (L x W x H): 150 x 73 x 44 mm (5.9 x 2.87 x 1.73 in.)
• Weight: 475 g (16.76 oz.)
• Housing ratings: IP67 (weather), IK10 (vandal), IEC 60068-2-27 (shock), IEC 60068-2-32 (freefall), IEC 60068-2-6 temperature: -40 - 75°C (-40 - 167°F)
• Storage temperature: -40 - 80°C (-40 - 176°F)
• Operating humidity: 10 - 90% RH, non-condensing
• Storage humidity: 5 - 90% RH, non-condensing

Package Contents

• Outdoor Vandalproof Gigabit PoE++ Injector
• Earthing kit
• Three IP67-rated cable glands
• Mounting kit for SKUs
  • Alphanumeric Part#: IPI-OD60G
  • Amazon ASIN: B09SQ5T8BD
  • EAN: 0766623561785
  • UPC: 766623561785
  
  Physical Specifications
  • Product net weight: 0.48 kg
  • Product gross weight: 0.81 kg
  • Dimensions: 150 (L) x 73 (W) x 44 (H) [mm]
  • Packaging: Retail Box