Easy installation
OM2 LC to ST Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic.
EMI immunity
OM2 Multimode fiber is immune to many environmental factors, such as Electromagnetic Interference and Radio-Frequency interference, so it is possible to run patch cords next to industrial equipment without any problem.
Properly tested
Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss.
Cable Specifications
Wavelengths: 850 and 1300nm
Orange Jacket
Bend Radius - Minimum / 5cm
Cable Jacket (3.00mm)
Operating Temperature / -4° to 158° F (-20° to +70° )
Multimode 50/125um
Standard Zip Cord
OM2 fiber conforms to ITU-651, TIA/EIA 492AAAA
Multiple Sizes Available
LC /ST connector (Fiber patch cord)
LC ST Patch Cord feature precision hold, plastic ferrule connectors . They comply with all ANSI/EIA/TIA standards.
LC to ST Multimode Duplex are used to connect network devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, fiber optics patch panels, fiber optic transceiver and fiber optic network, industrial, and military applications. Connectors feature dust caps on the tips for protection.
High-quality LC to ST Fiber Patch Cable 50/125 OM2 Multimode fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, commercial, LAN, SAN and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services.
This fiber LC ST Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.
This MM fiber has an orange color jacket with a 3.00 mm diameter. OM2 cables have a 500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources and a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength.
This LC to ST Multimode Duplex OM2 fiber patch cords operate at -20°to +70°and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
