Readwell before buying
You are buyingonly files for 3D printing, no material objects will be sent.
After thepurchase you will be sent a link, where you can download the files
no refunds aremade
NasaSaturn V Rocket and Launch Pad Apollo 3D model, file STL OBJ for 3DPrinter,
file optimized for FDM-FFF DLP-SLA-SLSprinting
Two size 1: 24for FDM-FFF, 1: 35 for DLP-SLA-SLS,
Assembly Figure
more than 200 hours of modeling
two versions
however, the dimensions can be changedwith each slicer
in total iscomposed of 11 mil points
all the files have been decimated bythe polygons, but without losing the details, this makes the lightfiles suitable for each computer
dimensions approximately FDM-FFF W18 Cm D 18 Cm H 52 Cm
W 7 Inch D 7 inch H 20 inch
dimensions approximately DLP-SLA-SLS W 9 Cm D 9 Cm H 26 Cm
W 3,5 inch D 3,5 inch H 10 inch
all files are already in place foroptimal printing
SaturnV 3D model was designed to get a cleanprint result, without considering printing material consumption,However, you are free to rotate, or scale,
every part of the model in the mostconvenient way for you.
Each file has been checked and repairedwith Netfabb
The parts of the model are alreadypositioned for 3D printing
Compatible with every Slicer-Simplify3D, Care, Slic3r, etc ...
All the parts of the model have beencut so as to be printed vertically, for a higher quality of printing
SaturnV[a]isa retired Americansuperheavy-lift launch the Moon.The rocket washuman-rated,withthreestages,and powered withliquidfuel.It was flown from 1967 to 1973. It was used for nine crewed flightsto the Moon, and to launchSkylab,the first Americanspacestation.
Asof 2022,the Saturn V remains the only launch vehicle to carryhumans beyondlowEarth orbit(LEO).Saturn V holds records for the heaviest payload launched and largestpayload capacity to low Earth orbit: 310,000lb (140,000kg),which included the third stage and unburnedpropellantneededto send theApollocommand and service moduleandLunarModuletothe Moon.
Thelargest production model of theSaturnfamily of rockets,the Saturn V was designed under the direction ofWernhervon BraunattheMarshallSpace Flight CenterinHuntsville,Alabama;the lead contractors wereBoeing,NorthAmerican Aviation,DouglasAircraft Company,andIBM.A total of 15 flight-capable vehicles were built, plus three forground testing. Thirteen were launched fromKennedySpace Centerwithno loss of crew orpayload.Atotalof 24 astronautswerelaunched to the Moon fromApollo8(December1968) toApollo17(December1972).
*wikipedia*
Recommendedsettings for printing
each part was cut to be printedvertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5skirt
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (whenentering 0.04mm index, the 3D printer perceives the model asmonolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended fora better quality for the printed model. However, the printing timewill double.
As a STL file provider, our goal is toensure that the files are error-free and printable in the mostaccurate way. This is why we only test print the most difficultsegments of
the model’s parts.
The model's parts have been tested andprinted in PLA. In case you need advice where to get your filamentsfrom, check our partner's website.
Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Grid
Line distance: 1.5mm
LEGAL PRIVACYPOLICY: Any UNAUTHORIZED use of my profile, video, pictures oraudio in any form or in a forum now or in the future is NOTpermissible without my expressed written consent.
Any act to promote or gain profit inany manner (e.g. either monetarily or socially) from the use of myprofile, video, pictures or audio in any form my profile is aviolation
of my privacy and subject to legalaction. BY WATCHING THIS: You acknowledge and agree that you shallnot post, upload, publish, transmit or make available in any waycontent of this
page including images and recordingstreamed live video available for download. This is intended as, andpresented as a one time, live, one view presentation only.
Penalties of Copyright Infringement: Byreproducing, republishing or redistributing the work of a copyrightholder without permission, you may be violating or infringing
on his or her rights under theCopyright Act. The copyright holder may sue for compensation costfrom $ 250 to $ 150,000 or one year jail sentence
