Nano Polymer Adhesive 50ml - 3D Printing Bed Adhesion for PLA ABS Nylon
NANO POLYMER ADHESIVEUNMATCHEDBED ADHESION
Designed for PEEK, ULTEM™, PPSU, and other high-performance FDM polymers, this build plate glue works for nearly every filament - Nylon, ABS, ASA, PLA, PETG, PEI, PSU, and almost every filament we've tested.
WORKS ON MOST SURFACES:
Borosilicate Glass, Ceramic Glass, PCB board, FR4, Garolite, Carbon Fiber, Creality Glass (non-coated), Fiberglass, BuildTak™, PEI, WhamBam, Flex Plates, Kapton tape, and more. Activates with a heated buildplate over 60ºCWhat filaments does NPA work with?PLA (Polylactic Acid), PETG (Polyethylene Terephthalate Glycol-Modified), SimuBone, HIPS (High Impact Polystyrene), ABS (Acrylonitrile Butadiene Styrene), ASA (Acrylonitrile Styrene Acrylate), PCTG (Polycyclohexylenedimethylene Terephthalate Glycol), TPU (Thermoplastic Polyurethane), PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene), PC (Polycarbonate), Nylon 6 (Polyamide 6), Nylon 12 (Polyamide 12), PPA (Polyphthalamide), High Temp Nylon, PPE/PS (Polyphenylene Ether/Polystyrene), PVDF (Polyvinylidene Fluoride), PPS (Polyphenylene Sulfide), PSU (Polysulfone), PES (Polyethersulfone), PPSU (Polyphenylsulfone), PEEK (Polyether Ether Ketone), PEKK (Polyether Ketone Ketone), PEI (Polyetherimide), TPI (Thermoplastic Polyimide), PVA (Polyvinyl Alcohol), and TPE (Thermoplastic Elastomer). It also delivers strong adhesion for composite and specialty filaments such as flexible filaments (e.g., Flex PLA, Soft PLA), carbon fiber filled filaments, glass fiber filled filaments, stone filled filaments, and glitter filled filaments.