Here's a Nikon LS-2000 SCSI 35mm slide/film scanner from the late 90's. It has been tested and is working fine. It comes with the MA20 Slide Mount adapter only. The FH-2 strip film holder and the SA-20 strip film adapter are not included. It does come with the manual, some CDs, a power cord, two SCSI cables and an Orange Micro Grappler 906F PCI SCSI adapter card for Mac computers. And please undestand that due to the SCSI interface this scanner can be a challenge to get running on a modern computer. You will need either a SCSI-to-USB adapter device or a computer with a PCI slot motherboard and some scanning software. I tested it with VueScan Pro from Hamrick Software (not included) running under Linux Mint using the included SCSI card and cable to produce the scan shown in the photos. The scanner is clean and in good condition. The MA-20 Slide mount adapter and the front of the scanner do have some yellowing, as shown in the photos, but it's not severe. Buyer to pay actual cost of shipping 12 pounds by USPS Ground Advantage.
Please Note: This unit will be shipped with the TRANSIT SCREWS installed to protect the scanning mechanism, as indicated in the manual. After receipt, they must be removed prior to powering up or the scanner could be damaged.