Standard Resin

ABS-Like Resin

Water washable Resin

Water Washable ABS-Like Resin

PA-Like Resin

JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin PrinterParameter:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

• Shore Hardness: 75-80D;
• Shrinkage: 6-8%
• Flexural strength: 25-50
• Extensibility: 20-45 Mpa
• Elongation at break: 20-50
• Shelf life: 12 months

Good performance in toughness
Improved toughness, JAYO nylon-like 3D printing resin has higher toughness than traditional 3D resin. Models that can withstand large tensions cannot easily break. High-quality 3D resin for resin printersHigh precision and filigree prints
Use high-quality materials and a rigorous production process,
to achieve a high-precision nylon resin printing effect. With a delicate printing model and a clear surface texture, you can really achieve a smooth and comfortable printing experienceIncrease in hardness
Nylon-like resin with increased hardness, which is harder than ABS-like resin. The model is drillable, but not brittle. It meets your needs for printing models with high hardness

ABS-Like ResinStandard ResinWater Washable ResinPlant-Based ResinPrinter Setting:RGB LCD Screen：Bottom Exposure:20-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-4sPrinter Setting:RGB LCD Screen：Bottom Exposure:20-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-4sPrinter Setting:RGB LCD Screen：Bottom Exposure:30-80sNormal Exposure:4-12sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-3.5sPrinter Setting:RGB LCD Screen：Bottom Exposure:20-80sNormal Exposure:5-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:2-4s

• Shore Hardness: 70-80D;
• Shrinkage: 6-8%
• Viscosity (25°C)): 210-400MPa·s
• Liquid density: 1.05-1.25g/cm3
• Solids density: 1,195 g/cm³
• Flexural strength: 30±10%MPa
• Extensibility: 20-35 Mpa
• Elongation at break: 20±5%
• Shelf life: 12 months

• Shore Hardness: 80-85D;
• Shrinkage: 7-9%
• Viscosity (25°C)): 210-400MPa·s
• Liquid density: 1.05-1.25g/cm3
• Solids density: 1,195 g/cm³
• Flexural strength: 35±10%MPa
• Extensibility: 20-40 Mpa
• Elongation at break: 10±5%
• Shelf life: 12 months

• Shore Hardness: 80-85D;
• Shrinkage: 6-8%
• Viscosity (25°C)): 210-400MPa·s
• Liquid density: 1.05-1.25g/cm3
• Solids density: 1,195 g/cm³
• Flexural strength: 45±10%MPa
• Extensibility: 30-50 Mpa
• Elongation at break: 11±3%
• Shelf life: 12 months

• Shore Hardness: 80-85D;
• Shrinkage: 7-9%
• Viscosity (25°C)): 210-400MPa·s
• Liquid density: 1.05-1.25g/cm3
• Solids density: 1,195 g/cm³
• Flexural strength: 30±10%MPa
• Extensibility: 20-35 Mpa
• Elongation at break: 5-12%
• Shelf life: 12 months

JAYO 3D Resin 405nm UV For LCD/DLP/SLA 3D PrinterImportant Safety Instructions:

• Shake the bottle before use
• Recommended temperature 20°C - 25°C
• Protect it from dust and direct sunlight
• Keep it out of the reach of children.
• Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.