PCI To 4-port SATA Expansion Card SiI3114 Chip RAID Controller for SSD Drive Specifications: Serial ATA (SATA) – 1.5 Gbps (150MB/s) Compliant with SATA 1.0 specification Integrated SATA Transport, Link logic, and PHY layer 48-bit sector addressing Four independent DMA channels with 256B FIFO per channel Virtual DMA in PCI with serial link in legacy PIO mode Supports command buffering for ATA TF shadow registers Supports ATAPI devices: CD-ROM, DVD-ROM, etc. Hot-Plug capable Support 32-bit wide PCI bus at 66MHz Selectable drive strength on Tx for backplane applications Supports spread spectrum clocking to reduce EMI Single, digital PLL architecture with 1 PLL for all 4 channels Drivers supports Just a Bunch of Disks(JBOD) ROM BIOS supports RAID setup and Boot Features RAID Function: Supports RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1, RAID 5 and RAID 10 Adjustable stripe size for RAID 0 Support co-exist RAID set and Non-RAID HDD Allow HDDs with different sizes to be configurated in a RAID set SATARaid Management Utility supports SATARAID drivers used to host RAID levels 0, 1, 0+1, 5 and 10. Use this utility with the SATARAID BIOS and drivers to create, monitor, manage, and access RAID volumes. Support Windows System : Windows 98SE / Me / 2000 / XP / NT 4.0 / XP 64-bit / Vista / win7 32bit/win7 64bit/win8/win10, Linux & Netware OS. Packing Include: 1 x PCI 4ports SATA Raid Card