Restore any APC 0U rack PDU to its rack in seconds. These replacement mounting peg buttons are a direct fit for the APC 0U PDU keyhole mount. The head is 25 mm across, the shoulder is 13.5 mm, and the overall height is 7 mm, matching the original APC peg. Printed to order in the USA by DC Additive Pros, and every pair ships with the mounting screws.
How it works: attach each peg to your PDU with the included M4 screw, then the PDU hangs on the enclosure keyhole slots with no tools. These pegs are the replacement for APC's discontinued toolless mounting hardware.
APC discontinued the original hardware, and these pegs are almost always lost when a 0U PDU is redeployed or bought used. This is the exact part you need to hang the PDU again, with no need to buy a whole new cable channel or bracket kit.
What you get:
Made to order in tough ABS, printed in the United States
Two M4 x 10 mm flat head machine screws included per pair
Head approx: 25 mm diameter, shoulder 13.5 mm diameter, 7 mm tall
Direct fit to the standard APC 0U PDU keyhole mount
Compatibility:
Fits APC 0U Rack PDUs across the AP7500, AP7800, and AP7900 series, plus the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series. Verified model references include AP7530, AP7532, AP7540, AP7830, AP7840, AP7841, AP7862, AP7863, AP7864, AP7866, AP7866A, AP7867, AP7893, AP7930, AP7931, AP7932, AP7940, AP7941, AP7960, AP7961, AP7990, and AP7991. If your model is not listed, message us the number and we will confirm fitment.
Material notes:
ABS is rated for continuous rack interior temperatures up to 80 C, which covers normal cold aisle and hot aisle conditions. If your facility specification requires a flame rated or higher temperature material, we can quote that on bulk orders.
Pack sizes:
Choose a 2 pack for a single PDU, a 4 pack for two PDUs, or a 12 pack that mounts six PDUs and lowers your cost per peg for refurbishers and MSPs.
Bulk and custom orders:
Need more than a dozen? We supply the standard peg in 24, 50, and 100 count boxes for refurbishers, MSPs, and data center operators. Message us for bulk pricing. We also print custom work, including other APC models, other PDU brands, and nonstandard peg sizes. Custom geometry is made to order in bulk only, with a 25 piece minimum, because each custom run requires setup and engineering time. Message us with your part and quantity for a quote.
Frequently asked questions:
What replaces the discontinued APC toolless mounting pegs? These pegs are a direct replacement for the APC 0U PDU toolless mounting buttons that APC discontinued. They drop into the same keyhole slots and fasten with a standard M4 x 10 mm screw into the PDU rear insert.
What size are APC PDU mounting pegs? The head is 25 mm in diameter and 2.8 mm thick, the shoulder is 13.5 mm in diameter, and overall height is 7 mm, matching the original APC disc peg.
Do these fit AP8000 series PDUs? Yes. The same peg fits the APC AP7500, AP7800, and AP7900 series plus the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series, because they share the same M4 insert and keyhole mount.
Are the screws included? Yes. Every pair ships with two M4 x 10 mm flat head machine screws.
Do you offer bulk or custom orders? Yes. Bulk quantities of the standard peg are available in 24, 50, and 100 count boxes, message us for pricing. Custom sizes, other PDU brands, and nonstandard geometry are made to order in bulk only, with a 25 piece minimum, because each custom run takes setup and engineering time.
Where are these made? Every peg is 3D printed to order in the United States by DC Additive Pros.
Compatible with APC brand PDUs. DC Additive Pros is not affiliated with, authorized by, or endorsed by Schneider Electric or APC. APC, NetShelter, and all model numbers are trademarks of their respective owners, referenced here only to indicate fitment.
