• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

Photon P1 14K Resin 3D Printer Stability Ball Screw 14K Precision & Lighturbo 4Photon P1 14K Resin 3D Printer Stability Ball Screw 14K Precision & Lighturbo 4 Product description 1 More Stable Printing 2 Increased Print Success 1 More Resins Compatible 2 Temperature Control Perform Consistently Well

1. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. wave release Film Wave Release Film
   

   Wave Release Film creates a micro-air cushion between the plate and resin during printing, reducing release force by 60% compared to NFEP films. This dramatically increases print success rate and preserves fine details for consistent, high-quality results.

2. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. The Source of Consistency: LighTurbo 4.0 COB+Aspherical Fresnel Lens
   

   Anycubic LighTubro 4.0 combined with Fresnel lenses and front-facing reflectors can reach the light angle within 2°, and light uniformity is more than 92%. 8mm copper tubing enhances heat dissipation efficiency, ensuring stable light source performance with luminous flux deviation ≤5%.

Intelligent Assistant 3.0, Press Start & Leave the Rest to the Assistant

1. Intelligent Leveling System 3.0
   
   • Factory‌ Calibration - Prints right out of the box
   • Auto-Leveling Self-Check‌ - Automatically performs bed leveling self-check before printing to ensure optimal platform readiness.
   • Leveling-Assist - Displays real-time force values at four corners for fine-tuning.
   The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent Leveling System 3.0
2. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent Dynamic Adjustment Intelligent Dynamic Adjustment
   
   1. Dynamic Release 3.0, Monitors real-time layer separation forces to modulate the lift height and speed. This ensures reliable release with every layer, significantly boosting both print success rate and quality.
   2. Light-Off Compensation 3.0: Dynamic, Calculates resin flow-back rate and dynamically adjusts the light-off duration to precisely prepare each layer for exposure, ensuring optimal speed and efficiency.
3. Intelligent & AI Inspection: Double-Checked
   

   The new AI detection feature in Smart Detection can be applied to build plate installation checks and base separation detection scenarios. This prevents printing failures caused by platform installation issues and promptly identifies model detachment from the base, reducing wasted time.

   Additionally, resin level detection and residue detection in the resin tank ensure rsuccessful 3D printing.

   The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent & AI Inspection: Double-Checked

1 Resin Drip Hanger 2 Effortless Function 3 Quiet Printing 4 New Version Slicer 5 Print Model Library

• What types of 3D resin can the Photon P1 print?

  The Photon P1 supports a variety of industrial-grade resin materials, with a maximum compatible resin viscosity of 8000cps. It is compatible with all resins of Anycubic

• Print model does not stick to the build plate

  1. Clean dirty/oily build plate.

  2. Adjust resin settings via listing image (for our resins).

  3. Re-level build plate.

  The above are some troubleshooting steps, for further assistance, please refer to the product manual.

• What is the maximum USB flash drive capacity supported by the Photon P1?

  It is recommended to use a USB drive with a capacity of 128GB or less.

• How many different colors or material types can the Photon P1 print simultaneously?

  The Photon P1 supports single-color, single-material printing. Add Anicubic's new dual-material printing kit for simultaneous two‑material, two‑color printing.

• 【Sturdy Structure, No Wobble】 Anycubic Photon P1 employs stable ball screws and precision guide rails, combined with a precision-engineered print platform, to create a stable printing structure. This effectively minimizes motion vibration, enabling smoother lifting and lowering, ensuring flawless detail accuracy
• 【Easy Release, Higher Success Rate】The Wave Release Technology generates micro-airflow during plate lifting, reducing release force by 60%. 3D Models detach more easily, lowering failure rates and ensuring reliable long-term printing
• 【Ready to Print, Auto-Leveled】Smart Leveling 3.0 of Photon P1comes factory-calibrated, performs automatic self-check before each print, and provides real-time pressure response across four corners for fine-tuning. No need more manual bed leveling and just focus on creating
• 【AI Monitoring for Worry-Free Printing】The AI-powered inspection system performs dual verification of build plate installation and bottom layer separation. Integrated with resin level monitoring and residue detection in the vat, it identifies potential issues early, ensuring reliable printing every time
• 【Print Industrial Resins Instantly】Anycubic Photon P1 can handle ultra-high viscosity resins with a viscosity up to 8,000 cps, which is 40 times that of standard resins, meeting the demands of advanced creator. Pre-configured settings for Anycubic resins allow you to start printing right out of the box with no manual calibration
• 【14K Precision, Crisp Details】Photon P1 is equipped with a 10.1-inch 14K high-precision mono LCD screen with a resolution of 13,312 x 5,120 pixels and an XY pixel size of 16.8 x 24.8 micrometers. It can print with a minimum aperture of 0.3 millimeters, enabling outstanding reproduction of fine details

Product Dimensions 16.93"D x 24.41"W x 16.54"H Item Weight 37.9 pounds Material Aluminum Color white Compatible Devices Laptop, Personal Computer, Smartphone Product Dimensions: 16.54 inches x 16.93 inches x 24.41 inches. Weight: 37.9 lbAbout Us

Welcome to our eCommerce shop. We're dedicated to providing you with high-quality products at unbeatable prices. Our professional customer support team is more than happy to help with anything that you need.

We’re proud to serve you and bring a smile to your face with our top-notch service and products. Please visit our store for a full list of products on sale, and don’t miss what we have to offer.

Payment policy

1. We only accept payments made by PayPal.
2. Please make sure that your PayPal and shipping addresses match.
3. Immediate payment is required before we send out your package.

Shipping policy

We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.

In most cases, your package will arrive before due time as it is a high priority for us. If there are any unexpected delays, please let us know and we will take care of it immediately.

We have multiple locations in the US; residents of these states will be charged tax according to the state they reside in. Tax information is available at checkout.

Returns

Before making a purchase, please carefully review our complete Return Policy located under the “Buy Now” section to ensure you fully understand the terms and conditions.

Please note: Returns are not available on items shipped outside of the USA