Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.SIM7600A-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G Support, GNSS Positioning, For North America4G HATFOR RASPBERRY PI

Enabling LTE Cat-4 4G / 3G Communication & GNSS Positioning

Based on SIM7600A-H

Features At A Glance

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
• Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
• Onboard CP2102 USB to UART converter, for serial debugging
• Breakout UART control pins, to connect with host boards like Arduino/STM32
• SIM card slot, supports 1.8V/3V SIM card
• TF card slot is NOT soldered for this variant
• Onboard audio jack and audio decoder for making telephone call
• 2x LED indicators, easy to monitor the operating status
• Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
• Baudrate: 300bps ~ 4Mbps (default: 115200bps)
• Autobauding baudrate: 9600bps ~ 115200bps
• Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
• Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
• Comes with development resources and manual (examples for Raspberry Pi/Jetson BANDLTE Cat-4LTE-FDD: B2/B4/B123GUMTS/HSPA+: B2/B52GN/AGNSSSatellite type16-channelC/A CodeSensitivity-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)Cold starts: -148 dBmTime-To-First-Fix (open air)Cold starts: <35sHot starts: <1sSMS AND AUDIOSMSSupported types: MT, MO, CB, Text, PDUStorage: USIM card and ME (default)Audio featureSupports echo cancellationSupports noise reductionOTHERPower supply5VOperating voltage5V / 3.3V (configured via jumper)Operating temperature-30°C ~ 80°CStorage temperature-45°C ~ 90°CDimensions56.21mm × 65.15mmStandard Raspberry Pi 40PIN GPIO

  Compatible With Raspberry Pi Series Boards, Jetson Nano

  Dial-Up On Windows/Linux

  LTE Cat-4:Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *
  3G (HSPA+):Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *

  * stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

  Cloud Communication

  Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS

  GNSS Positioning

  Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning

  Telephone Call & SMS Support

  Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack

  What's On Board
  1. SIM7600A-H
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator
     translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. MP1482 power chip
  7. Raspberry Pi GPIO header
  8. SIM7600 control interface
     for connecting with host boards like Arduino/STM32
  9. SIM card slot
     supports 1.8V/3V SIM card
  10. 3.5mm earphone/mic jack
  11. USB interface
      for testing AT Commands, getting GPS positioning data, etc.
  12. USB to UART interface
      for serial debugging, or login to Raspberry Pi
  13. MAIN antenna connector
  14. AUX antenna connector
  15. GNSS antenna connector
  16. Power switch
  17. Network status indicator
  18. Power indicator
  19. Operating voltage selection jumper
      configured via 0Ω resistor jumper
      VCCIO-3.3V: set operating voltage as 3.3V
      VCCIO-5V: set operating voltage as 5V
  20. UART selection jumper
      A: access Raspberry Pi via USB to UART
      B: control the SIM7600 by Raspberry Pi
      C: control the SIM7600 via USB to UART
  21. PWR configuration jumper
      PWR - 3V3: auto startup on power-up (default)
      PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
      Flight mode configuration jumper
      NC by default, no flight mode control pin
      Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
  22. USB connector solder pads
  23. BOOT forced programming solder pads
  Pinout DefinitionOutline DimensionsDevelopment Resources

• SIM7600A-H 4G HAT x1
• LTE Antenna x1
• GPS External Antenna (B)x1
• USB type A plug to micro plug cable x2
• RPi screws pack (2pcs) x1
12345