SUNLU Dryer Box:

S1 PlusS2S4 ProS4SP2E2AMSMax heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：85℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMS

SUNLU Filament：

PLA：PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！

• Printing Temp&Speed：

200-210℃：50 -100mm/s

210-240℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：40±6 MPa
• Flexural Strength：65±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：5±3 KJ/m2
• Heat Distortion (HDT)：55±5 ℃

High Speed PLA：Supports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.

• Printing Temp&Speed：

190-210℃ ：50-150mm/s

210-230℃ ：150-300mm/s

230-260℃ ：300-600mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：39±5 MPa
• Flexural Strength：70±5MPa
• (X-Y) Izod Impact Strength of Notched Specimen：4.5±2 KJ/m2
• Heat Distortion (HDT)：57±4 ℃

PLA+：The wire has good toughness and is not brittle or broken; Has good comprehensive mechanical performance, particularly resistant to drops, with an impact strength of up to 8KJ/m2, which is 2-3 times that of other PLA+ on the market;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

PLA+2.0 ：It has good toughness, 2-3 times that of regular PLA+ , and is resistant to drops and impacts.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

PETG：PETG combines the easy printability of PLA with the strength of ABS. It has excellent chemical and water resistance, making it suitable for printing functional parts. It’s tough and doesn’t easily break while printing.

• Printing Temp&Speed：

230-240℃：50 -100mm/s

240-260℃：100-200mm/s

• Heated Bed Temp：60℃-70℃
• Tensile Strength：48±10 MPa
• Flexural Strength：70±10 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：3±1 KJ/m2
• Heat Distortion (HDT)：70±5 ℃

High Speed Matte PETG ：PETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

240-250℃：100-300mm/s

260-270℃：300-600mm/s

• Heated Bed Temp：70℃-80℃
• Tensile Strength：46±5MPa
• Flexural Strength：75±6MPa
• (X-Y) Izod Impact Strength of Notched Specimen：3±1.5KJ/m2
• Heat Distortion (HDT)：70±2 ℃

SILK PLA+ ：Silky texture with strong shine, smooth and soft appearance; high interlayer strength, so printed models are not easy to crack or break.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-235℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±4MPa
• Flexural Strength：78±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 3.5±1.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

PLA Meta：Good liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.

• Printing Temp&Speed：

185-195℃：50-100mm/s

195-225℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±5MPa
• Flexural Strength：85±6MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 6.5±2.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

PLA Matte：Matte finish makes printed models feel more textured, ditching the plastic look;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-230mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：39±6 MPa
• Flexural Strength：72±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 5±2 KJ/m2
• Heat Distortion (HDT)： 55±5 ℃

High Speed PLA Matte：Supports printing speeds of 600mm/s, greatly improving printing efficiency; matte finish makes printed models feel more textured.

• Printing Temp&Speed：

190-210℃ 50-150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：27±4 MPa
• Flexural Strength：50±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 8±3 KJ/m2
• Heat Distortion toughness and high impact resistance ensure that printed parts are strong and durable; low shrinkage rate means high dimensional accuracy for printed models; 95℃ heat deflection temperature gives it some heat resistance, making it suitable for a wide range of uses.
  • Printing Temp&Speed：

  250-270℃：50-100mm/s

  270-290℃：100-200mm/s

  • Heated Bed Temp：80-100℃(Insulated and sealed environment,better effect)
  • Tensile Strength：35±5 MPa
  • Flexural Strength：60±10 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 15±5 KJ/m2
  • Heat Distortion (HDT):95±5 ℃
  TPU（90A）：Shore hardness 90A, highly elastic and wear-resistant;99.9% highly effective at preventing bacteria and mold, stays clean for a long time; excellent aging resistance, longer service life;
  • Printing Temp&Speed：

  220-240℃：≤40mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：30±3 MPa
  • Flexural Strength：/
  • (X-Y) Izod Impact Strength of Notched Specimen: /
  • Heat Distortion (HDT):36±2 ℃
  TPU（95A）：Hardness 95A, combining flexibility and toughness.
  • Printing Temp&Speed：

  220-240℃：≤40mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength： 31±3 MPa
  • Flexural Strength：/
  • (X-Y) Izod Impact Strength of Notched Specimen: 47±5 KJ/m2
  • Heat Distortion (HDT):/
  PETG Carbon Fiber： Contains 10% carbon fiber, high strength and toughness, printed parts are drop- and smash-resistant; with more carbon fiber, it hides layer lines.
  • Printing Temp&Speed：

  240-250℃：50 -150mm/s

  • Heated Bed Temp：70-80℃
  • Tensile Strength：32±4 MPa
  • Flexural Strength：55.5±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 7±2 KJ/m2
  • Heat Distortion (HDT):71±3 ℃
  ASA：Strong weather resistance, printed items can be used outdoors; high toughness, suitable for regular engineering parts; heat resistant up to 96°C, suitable for a variety of uses.
  • Printing Temp&Speed：

  250-260℃：50 -100mm/s

  260-280℃：100-200mm/s

  • Heated Bed Temp：90-110℃
  • Tensile Strength：39±4 MPa
  • Flexural Strength：68±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 7±3KJ/m2
  • Heat Distortion (HDT):101±2 ℃

  Contact us

  The best way to contact us is by messages.
  We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
  Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
  We commit you 100% satisfaction guarantee.

  response

  1.We will appreciate a positive response with all 5 star rating when you aresatisfied.

  2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.

  3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.

  4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.