Seagate IronWolf Pro 10TB NAS Hard Drive

Model ST10000NE0008-2PL103 | Serial ZS513ZYS | Firmware EN02

10TB | SATA III 6.0Gb/s | 7200 RPM | 256MB cache | CMR, not SMR | 3.5"

Pulled from a working QNAP NAS, wiped with a full single-pass zero write across all 10TB, thenre-tested. The complete condition report, with SMART data from before and after the wipe, isattached to this listing.

CONDITION

Reallocated 0. Pending 0. Offline uncorrectable 0. Reported uncorrectable 0. Spin retries 0.

Internal error log empty. Self-test completed without error. DriveDx health GOOD, 100%, 0 issues.

39,975 power-on hours with only 79 power cycles. Lifetime workload is roughly 157TB/year againsta 300TB/year rating, about half its rated duty. The hours are high because it ran continuouslyin a NAS, which is exactly what IronWolf Pro drives are built for.

WARRANTY

Covered by Seagate until January 19, 2027. Check it yourself with serial ZS513ZYS on Seagate'swarranty lookup before you buy.

ONE DISCLOSURE: 19 UDMA CRC ERRORS

These are interface errors, not media errors, and every one was logged during my own testingwhile the drive ran a 14-hour write in a USB dock. A second drive from the same batch did thesame thing on the same dock. Every media counter on this drive is zero.Full detail is in theattached report.