UBB Store

Seagate ST600MM0088 600GB 10K 2.5" SAS 6Gb/s Enterprise HDD Tested For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Seagate ST600MM0088 600GB 10K 2.5" SAS 6Gb/s Enterprise HDD Tested

Price: US $45.00

Seagate ST600MM0088 600GB 10K RPM 2.5" SAS Enterprise Hard Drive

Condition: Used, tested, sanitized, and ready for reuse.

Drive Specifications

Manufacturer: Seagate
Model: ST600MM0088
Capacity: 600 GB
Form Factor: 2.5-inch
Interface: SAS
Negotiated SAS Link Speed: 6 Gbps
Rotation Speed: 10,000 RPM
Logical Sector Size: 512 bytes
Serial Number: S4107EBB
Firmware Revision: TS05

SMART / Health Information

SMART Health Status: OK
Power-On Hours: Approximately 1,457 hours
Accumulated Start/Stop Cycles: 56
Accumulated Load/Unload Cycles: 1,386
Grown Defect List: 0
Uncorrected Read Errors: 0
Uncorrected Write Errors: 0
Uncorrected Verify Errors: 0
Temperature During Testing: 42°C
Drive Trip Temperature: 60°C

Self-Test Information

SMART self-test history shows completed short background tests with no first-error LBA recorded.
Dell PERC controller diagnostics also reported the drive as "UGood" with 0 media errors, 0 other errors, 0 predictive failures, no SMART alert, and a healthy 6.0 Gb/s SAS link.
An extended 64-minute SMART background self-test was successfully initiated.
The final extended-test result could not be captured because the subsequent smartctl query was unable to reopen the Windows device path.
For transparency, the extended test is therefore not being represented as having passed.

Additional SMART Information

The SMART report shows a non-medium error count of 310. This counter is separate from the drive's media defect information. The same report shows 0 grown defects and 0 uncorrected read, write, or verify errors. This information is provided so buyers can evaluate the complete reported health data.

Data Sanitization

The drive has been sanitized using data-erasure procedures compliant with DoD 5220.22-M standards. It is sold blank and may need to be initialized, partitioned, formatted, or configured in a RAID array before use.

Compatibility

This is a SAS drive, not a standard SATA drive. Please verify that your server, workstation, storage enclosure, backplane, and RAID/HBA controller support SAS drives before purchasing.

Included