Seeed Studio XIAO ESP32S3 & Wio-SX1262 Meshtastic LoRa Dev Kit with 3D Case, Pre-Flashed ESP32-S3 Portable Starter Node with 2dBi SMA Antenna and USB-C Cable
Product Details

• Publisher: seeed studio
• Publication date: 0

• Ready for Meshtastic: Start a LoRa mesh build faster with pre-flashed Meshtastic firmware. Use it to join or create a mesh network, test node behavior, or begin a DIY off-grid messaging project
• ESP32-S3 + SX1262 Wireless Core: Built around a dual-core ESP32-S3 MCU and SX1262 LoRa radio, supporting 862–930MHz LoRa plus 2.4GHz Wi-Fi and BLE 5.0 for mesh, router and sensor projects
• Low-Friction Starter Kit: The press-fit board design reduces basic assembly work, while the included antenna setup helps new makers avoid starting from a bare board with missing RF accessories
• Arduino, MicroPython and Grove Expansion: Use I2C, UART, SPI, GPIO/PWM and ADC access with compatible XIAO expansion boards or Grove modules to add sensors, displays or custom functions
• Compact Platform, Flexible Builds: The 21 × 18 mm XIAO form factor fits compact prototypes, wearables and embedded devices, while modular add-ons let you choose the GPS, display, power and enclosure your project needs

Start a Meshtastic Build Without Starting from a Blank BoardThe Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit is designed for makers, developers, Meshtastic beginners and LoRa hobbyists who want a compact, pre-flashed hardware platform for mesh networking, LoRa projects and sensor prototypes.Why This Kit Helps Ready for Meshtastic: Pre-flashed firmware helps reduce the first setup barrier for new users. Compact LoRa platform: ESP32-S3 MCU plus SX1262 radio hardware supports 862–930MHz LoRa communication. Wireless flexibility: Supports LoRa, 2.4GHz Wi-Fi and BLE 5.0 for different project paths. Maker-friendly assembly: Press-fit board connection reduces basic hardware setup work. Expandable development: Arduino, MicroPython, XIAO expansion boards and Grove modules help extend the kit beyond a basic node.Core Specifications MCUESP32-S3 dual-core Xtensa processor, up to 240MHz LoRa RadioSX1262-based LoRa hardware Frequency862–930MHz WirelessLoRa, 2.4GHz Wi-Fi, BLE 5.0 DevelopmentArduino and MicroPython ExpansionI2C, UART, SPI, GPIO/PWM, ADC, XIAO and Grove expansion paths PowerUSB Type-C interface and lithium battery charging management Size21 × 18 mm XIAO form factorChoose the Version That Fits Your Build VersionBest ForPackage Basic KitCustom development, embedded projects, sensor prototypes and custom enclosuresXIAO ESP32S3, Wio-SX1262 extension board, Wi-Fi antenna, LoRa antenna Kit with 3D CasePortable starter node, cleaner physical setup and beginner-friendly assembly pathXIAO ESP32S3 + Wio-SX1262 kit with 3D-printed enclosure, 2dBi 868–915MHz SMA antenna, 20cm USB Type-C cableProject Ideas Meshtastic node or router DIY off-grid messaging test node Single-channel LoRaWAN gateway experiment LoRa / LoRaWAN sensor platform Telemetry prototype with external sensors MQTT-connected mesh gateway experiment Wearable or embedded wireless projectBuild NotesThis is a modular development kit, not a finished GPS tracker. GPS, screen, battery, waterproof enclosure and solar charging are not built in. Select the Basic Kit for maximum customization, or choose the 3D Case version for a cleaner starter-node setup.