UBB Store

Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft
Price: US $89.99
Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft The Light-Link is a USB 3.1 Gen 1 (formerly USB 3.0) Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders. Note: This cable is compatible with devices that are USB 2.0 as well as USB 3.1 Gen 1 (Formerly USB 3.0), but it has to be plugged into a USB 3.1 Gen 1/USB 3.0 port in order to function! The supplemental power cable will be needed for USB devices that aren't low power. How it works The converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are used for non-data information such as +5v power for USB devices. The fiber strands carry all the data information. The light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality. Eliminates possible points of failure In a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters. Optional Extra power The Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices) Using with Oculus Quest? You will need a USB-C cable like this one (Sold Separately) Works with Oculus Quest and Quest 2. Does not work with the Valve Index VR Headset Specifications Mfg. Part Number SW-33042-30 30 ft. SW-33042-50 50 ft. SW-33042-100 100 ft. Brand Link by Sewell Specifications Length: 30ft Up to USB 3.0 speeds 5Gbps Recommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension. Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft

The Light-Link is a USB 3.1 Gen 1 (formerly USB 3.0) Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders. 

Note: This cable is compatible with devices that are USB 2.0 as well as USB 3.1 Gen 1 (Formerly USB 3.0), but it has to be plugged into a USB 3.1 Gen 1/USB 3.0 port in order to function! The supplemental power cable will be needed for USB devices that aren't low power.


How it works

The converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are uséd for non-data information such as +5v power for USB devices. The fiber strands carry all the data information.


The light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.


Eliminates possible points of failure

In a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters.



Optional Extra power

The Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices)

Using with Oculus Quest?

You will need a USB-C cable like this one (Sold Separately)

Works with Oculus Quest and Quest 2. 

Does not work with the Valve Index VR Headset


SpecificationsMfg. Part Number
  • SW-33042-30 30 ft. 
  • SW-33042-50 50 ft.
  • SW-33042-100 100 ft.
Brand
  • Link by 30ft
  • Up to USB 3.0 speeds 5Gbps
  • Recommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.
× × × × × × ×
Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on !

Additional Information

No additional information at this time

Ask seller a question

You might also like Sewell Deadbolt® Banana Plugs Sewell BlastIR Wireless Pro IR Repeater – Long-Range Wireless IR Extender for Ho Silverback Speaker Wire with Banana Plugs – Pre-Terminated, Oxygen-Free Copper, Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Sewell Direct

Shipping & Payments

Click the Shipping & Payments tab above the listing description for more info

Payment

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on !

Returns

Returns are accepted

Items must be returned within 60 days of the sale ending

Seller will pay for return shipping.

integration by

Buy Now