Printium Silver DTF Film – 23.6" × 328 ft (60cm × 100m) | Metallic Chrome Finish | Cold Peel | Cotton Polyester PRINTIUM ✦ Specialty DTF Film · Silver Chrome · High-Shine Metallic Silver DTF Film
23.6" × 328 ft (60 cm × 100 m) · Cold Peel
Liquid chrome brilliance on any fabric. Genuine metallic silver reflection — not flat gray ink. PET film with high-shine chrome foil coating, compatible with your standard CMYK + White DTF setup. No weeding, no screen setup, no limitations.
328ft (100 m) · Roll Length 23.6" Width (60 cm) Cold Peel Release 100% 5-Star Reviews Metallic Silver Foil Coating Standard Inks No Weeding 284–302°F Press Temp Cold Peel Release Type All Fabrics Compatible Why Choose This Film The Chrome Is in the Film — Not the Ink
01 High-Brilliance Silver Foil Coating
PET film with a multi-layered metallic silver foil coating that delivers genuine reflective shine — not flat gray ink. The white ink underbase makes CMYK colors pop against the chrome surface, while the gold shines through for a sophisticated, luxury retail-ready finish that catches light at every angle.
02 No Specialty Inks Required
The glow effect is in the film, not the ink. Use your standard CMYK + White DTF inks exactly as you would with regular film. No line flushing, no ink switching, no reconfiguring your RIP. White-ink areas glow the brightest; CMYK-colored areas emit a luminous tinted glow.
03 Precision Ink Absorption on Chrome Surface
The surface is treated to handle high-density ink loads — CMYK and White bond to the chrome surface without bleeding or oiling. Anti-static coating on both sides ensures smooth tracking through the printer and prevents dust attraction and stepping errors on long runs.
04 Flexible, Durable Chrome Transfer
The silver metallic layer is protected by ink and adhesive once transferred. The chrome finish stretches with the fabric — no cracking, no stiff vinyl feel. Resistant to peeling and reflective luster loss through 50+ wash cycles when pressed correctly and washed inside out in cold water.
05 Gang Sheet Efficiency
23.6" (60 cm) wide — the professional standard for wide-format DTF machines. Gang multiple chest logos or large back-prints side-by-side in a single pass. 328 ft (100 m) roll length means long, uninterrupted production runs with minimal roll changes.
06 Premium Market Applications
Enter the "Luxury Customization" market with zero additional hardware investment. Perfect for high-end streetwear and brand labels, corporate branding, holiday and commemorative event apparel, boutique fashion drops, and any design where a genuine silver metallic finish justifies a premium price point.
Technical Details Full Specifications SpecificationDetail Product NamePrintium Silver DTF Film BrandPRINTIUM Roll Size23.6" × 328 ft (60 cm × 100 m) Film TypeSingle-side printable PET film with metallic silver foil coating Peel TypeCold Peel — wait 8–10 seconds after pressing before peeling Press Temperature284–302°F (140–150°C) Press Time8–10 seconds Ink CompatibilityAll water-based DTF inks (standard CMYK + White) — no specialty ink required Powder CompatibilityStandard DTF adhesive powders (fine and medium grain) Fabric CompatibilityCotton, Polyester, Nylon, Spandex, Blended fabrics Compatible ApplicationsAutomatic powder shakers and dryers — no special equipment needed Storage ConditionsCool, dry place away from direct sunlight. Keep sealed in original packaging. ConditionNew SKUPR-DFIL-006F Instructions How to Use
- 1 Print Your Design
Load the film into your DTF printer, printable side facing the printheads. Print your design using standard water-based DTF inks (CMYK + White). Important: print on the printable side only — do not print on the gold-coated side. No changes to your ink setup are needed — the gold effect is in the film coating, not the ink.
- 2 Apply Adhesive Powder
While the ink is still wet, apply DTF adhesive powder evenly over the printed design. Shake off excess. The film's coating ensures powder bonds only to ink-covered areas — no stray speckling on unprinted zones.
- 3 Cure the Design
Pass the film through your DTF dryer or curing oven until the powder is fully melted. The silver foil coating is heat-stable. Cure at 230°–260°F until the powder reaches a "sugar glaze" appearance.
- 4 Heat Press onto Garment
Position the cured film on the garment, printed side down. Press at 284–302°F (140–150°C) for 8–10 seconds at medium pressure (approx. 4–5 bar). Even pressure is critical for consistent glow activation across the full design area.
- 5 Cold Peel
After pressing, wait 8–10 seconds for the transfer to cool slightly before peeling. Peel the carrier film slowly and evenly for a clean, complete release. This is a cold peel film. Allow the garment to cool completely before peeling — peeling while hot may cause the metallic layer to lift unevenly. For maximum durability, press a second time for 5 seconds with a finishing sheet or parchment paper after peeling.
- 6 Store Unused Film Correctly
Reseal unused film in its original packaging immediately. Store in a cool, dry location away from direct sunlight and humidity. Do not bend, crease, or apply pressure to stored rolls. Keep away from high humidity and extreme temperatures.
Questions & Answers Frequently Asked Questions Do I need special inks or powder for this silver film? No. The silver metallic effect is built into the film's coating — not the ink or powder. Use your standard water-based CMYK + White DTF inks and regular DTF hot-melt adhesive powder exactly as you would with any standard DTF film. No line flushing, no ink switching, no weeding, and no changes to your RIP settings are required. How does the silver effect look — and what colored chrome effects are possible? The film delivers genuine chrome-level reflective shine — not flat gray ink. By printing semi-transparent CMYK inks over the silver base, you can create metallic color effects: blue on silver creates metallic blue, red creates metallic ruby, black creates gunmetal gray or carbon finish. Areas left to the white underbase or pure silver reveal the full chrome reflection — a versatile, high-value metallic finish that is impossible to achieve with standard DTF film. Why must this be cold peeled — what happens if I peel while hot? This film uses a cold peel mechanism specifically because the metallic foil layer requires complete cooling to bond permanently to the fabric. Peeling while hot may cause the silver metallic layer to lift unevenly, resulting in patchy or incomplete transfers. Allow the garment to cool completely to the touch before peeling, then peel slowly and evenly from one corner. What fabrics can I apply this film to? The film works on cotton, polyester, nylon, spandex, and blended fabrics — the same range as standard DTF film. The silver foil coating remains flexible after pressing, so it does not crack on stretchy materials like spandex or tight-fit athletic wear. Will the silver chrome finish crack or peel after washing? When pressed at the correct temperature (284–302°F) and pressure and fully cold-peeled, the silver transfer is highly resistant to cracking, peeling, and metallic luster loss. It can withstand 50+ wash cycles without significant shine loss. For best results: wash inside out in cold water, tumble dry on low, and avoid bleach or harsh chemical detergents. An optional second press with a finishing sheet after peeling further improves durability. What are the best use cases for silver DTF transfers? This film is ideal for: athletic and sportswear with platinum-level jersey numbers and reflective team logos; tech and automotive branding on apparel and promotional items where chrome metallic finish makes an impression; futuristic streetwear drops; special events and limited-edition merchandise; and any design where chrome-level shine creates premium perceived value. Specialty Film Range Which Specialty Film Is Right for You?
Film Effect Press Temp Press Time Peel Best For ✨ Glitter Sparkling shimmer · multi-color 300–320°F 8–12 sec Cold Dancewear, cheer, holiday, kids 🟡 Gold High-brilliance metallic silver foil 284–302°F 8–10 sec Cold (full cool) Luxury branding, streetwear, events ⚪ Silver Chrome / metallic silver foil 284–302°F 8–10 sec Cold (full cool) Sportswear, tech branding, fashion 🌙 Glow in the Dark Neon green photoluminescent glow 300–320°F 8–12 sec Cold (8–10 sec) Festival, safety, kids, streetwear
Order with Confidence
Professional specialty DTF film — same day shipping available on qualifying orders.
✓ Genuine Brand 328 ft Per Roll Silver Chrome Foil 100% 5-Star Reviews DTFBANK × PRINTIUM
