Sun 370-4290 System Config Card Reader, with 370-4285 System Configuration Card For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sun 370-4290 System Config Card Reader, with 370-4285 System Configuration Card
Price: US $20.00
LED/System Configuration Card Ready with System Configuration Card Manufacturer: Sun MicrosystemsPart# 370-4290Description: LED/System Configuration Card ReaderPard# 370-4285Description: Configuration CardCondition: Clean, Tested, Pull Supported Sun Workstation / Server:
Sun Fire V120
Sun Netra 120
Sun Netra T1
Sun Netra T1 AC200
Sun Netra T1 DC200
370-4290 Manufacturer Notes:
The minimum operating system is Solaris 8 HW: 10/00.
The hostid, MAC address, and OBP environment settings are stored on System Configuration Card 370-4285.
The hostid, MAC address, and OBP environment settings are loaded to the Netra T1 System Board NVRAM during OBP initialization.
OBP will not complete initialization without a Smart Card.
The system will not boot until OBP initialization is complete.
370-4290 is not Field Replaceable on the Sun Fire V100.
370-4285 Manufacturer Notes:
The System Configuration Card retains the server's MAC address, hostid, and NVRAM settings for transfer to a new motherboard or server.
To transfer the System Configuration Card to a new server:
Power down both the old and the new Netra servers.
Remove the front bezel from both the old and the new servers.
Remove the System Configuration Card from the old server and insert it into the new one.
Replace the front bezel on the new server. You can secure the new System Configuration Card by fixing a tie-wrap through the hole in the front mounting of the memory card reader.
You are purchasing the 370-4290 / 370-4285 pictured. Ships SAFE & Fast!!!
