Product SKUsSYS-F628R3-RC1B+

• SuperServer F628R3-RC1B+ (Black)

Motherboard
Super X10DRFR-NProcessor/CacheCPU

• Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
  
• Dual Socket R3 (LGA 2011)

Cores / Cache

• Up to22 Cores†/ Up to55MB†Cache

System Bus

• QPI up to 9.6 GT/s

Note†BIOS version 2.0 or above is required

System MemoryMemory Capacity

• 16x 288-pin DDR4 DIMM slots
• Up to 2TB†ECC 3DS LRDIMM, 1TB ECC RDIMM

Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

• RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors

On-Board DevicesChipset

• Intel® C612 chipset

SAS

• SAS 3.0 (12Gbps) via Broadcom 3108
• HW RAID 0, 1, 5, 6, 10, 50, 60

SATA

• SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Controllers

• Intel® i350-AM2 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• ASPEED AST2400 BMC

Input / Output (per node)SAS

• 8 SAS3 (12Gbps) ports

LAN

• 2 RJ45 Gigabit Ethernet LAN ports
• 1 RJ45 Dedicated IPMI LAN port

USB

• 2 USB 3.0 ports

VGA

• 1 VGA port

ManagementSoftware

• SuperDoctor® 5
• Watch Dog
• NMI
• IPMI 2.0
• SUMandSSM

Power Configurations

• ACPI / APM Power Management
• Power-on mode for AC power recovery

ChassisForm Factor

• 4U Rackmount

Model

• 17.63\" (448mm)

Height

• 6.96\" (177mm)

Depth

• 29\" (737mm)

Package

• 28.3\" (W) x 15.0\" (H) x 42.4\" (D)

Weight

• Net Weight: 105 lbs (47.63 kg)
• Gross Weight: 150 lbs (68.04 kg)

Available Colors

• Black

Front PanelButtons

• Power On/Off button
• UID button

LEDs

• Power status LED
• Hard drive activity LED
• 2 Network activity LEDs
• Information LED (UID, Fan failure, Overheat)

Expansion Slots (per node)PCI-Express

• 1 PCI-E 3.0 x16 (LP) + 1 Micro LP
• MicroLP Adapter Matrix(Networking options)

Drive Bays (per node)Hot-swap

• (6+2) 3.5\" Hot-swap SAS3 HDD trays
• 8 SAS3 or 6x SAS3 + 2 NVMe (optional)
  Note: NVMe support requires 2 CPUs installed

Backplane

• 1 SAS/SATA backplane
• 1 SAS/SATA/NVMe hybrid (2 slots)

System Cooling (per node)Fans

• 2x 8cm 11k RPM middle fans

Power Supply1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2AC Input

• 1000W Output @ 100-140V, 8-12A, 50-60Hz
• 1280W Output @ 180-240V, 6-8A, 50-60Hz

DC Output

• 1000W: +12V/83A; +5Vsb/4A
• 1280W: +12V/106.7A, +5Vsb/4A

Certification
Platinum Certified
[Test Report]System BIOSBIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)
• APM 1.2
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI

Operating Environment / ComplianceRoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature:
  10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
  8% to 90% (non-condensing)
• Non-operating Relative Humidity:
  5% to 95% (non-condensing)