 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Supermicro CSE-116 2x CPU 16x DIMM 10x 2.5" Bay 2x PSU X9DRW-CTF31 1U CTO Server Model No:1027R-WC1RTCSE-116Motherboard P/N:X9DRW-CTF31 In Good Condition, Full Working OrderTested2 Year WarrantyIncludes Rails CTO Configure-To-OrderNo Processors, No Memory, No Hard Drives Included Included - 1 xSupermicro CSE-116 1U Server
- Up to 2 x Intel Xeon processor E5-2600 and E5-2600 v2 family (2x Heatsinks Included)
- Up to 16 x 240-pin DDR3 DIMM slots
- Up to 10 x 2.5" hot-swap SAS/SATA drive bay
- Motherboard -X9DRW-CTF31
- 1 x Supermicro 8-Port 12Gb/s SAS Internal RAID RAID 0, 1, 5, 6, 10, 50, 60
- 2 x 750W PSU -PWS-704P-1R
1 x Pair Of RailsManufacturer's Motherboard Specification Physical StatsForm Factor Dimensions - 12.3" x 13" (31.2cm x 33.0cm)
Processor/CacheCPU - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
andE5-2600 v2family†
(up to 135W TDP **)
Note† BIOS version 3.0 or above is requiredNote** Motherboard supports this maximum TDP. Please verify your system can thermally support.Cache System Bus System MemoryMemory Capacity - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type - Support ECC and non-ECC UDIMMs
DIMM Sizes - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage Error Detection - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset SATA - SATA3 (6Gbps) with RAID 0, 1, 5, 10
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
SAS - SAS3 support via AOM w/ Broadcom 3108
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 devices as default, more HDD devices support is also available as an option ** For special sku, please contact your Supermicro Sales.
IPMI - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Video - G200 (Nuvoton WPCM450 BMC)
Input / OutputSATA - 2x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
SAS LAN - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
USB - 4x USB 2.0 ports total (4 rear)
Video Serial Port / Header - 1x Fast UART 16550 port / 1 header
DOM - 1x DOM (Disk on Module) power connector
TPM Chassis (Optimized for X9DRW-CTF31 )1U Chassis - CSE-216BE1C-R920WB
- To support the new generation Intel® Xeon® processor-based motherboards,Revision Mchassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRW-CTF31Model(s) - SYS-1027R-WC1NRT
- 1 (x32) PCI-E 3.0 (left riser slot)
- 1 (x16) PCI-E 3.0 (right riser slot)
- 1 (x16) PCI-E 3.0 (HBA Mezzanine slot)
System BIOSBIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
ManagementSoftware - SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 1.5 / 2.0
- Intel Node Manager
Power Configurations - ACPI / APM Power Management
- Power-on mode for AC power recovery
PC Health MonitoringVoltage - Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +12V Standby, +3.3V Standby, VBAT, Memory Voltages.
- 6+1 Phase-switching voltage regulator
FAN - 6x 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED - CPU / System Overheat LED indicator
- Suspend static indicator LED
- UID/Remote UID
Other Features - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
- Dual cooling zones
Operating EnvironmentOperating Temperature Range - 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range - -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range - 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range - 5% - 95% (non-condensing)
CS dup.co.uk See RJ -44  |
|
