Supermicro H8SMI-2 Rev 2.01 ATX motherboard w/AMD Opteron 1385 2.7GHz 16GB DDR2
Description :
You are offerding ona New Pull (Pull from New System. Customer cancelled order)
Supermicro H8SMI-2 Rev 2.01 ATX motherboard w/AMD Opteron 1385 2.7GHz 16GB DDR2
Note: All motherboard comes with I/O shield in OEM/Bulk package. This listing comes with Motherboard, AMD Opteron 1385 2.7GHz CPU, CPU Cooling Fan and DDR2 16GB Memory
Specification:
MBD-H8SMi-2-O
- H8SMi-2 (Standard Retail Pack)
MBD-H8SMi-2-B
Physical Stats Form Factor
Dimensions
- 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
Processor/Chipset CPU
- Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
System Bus
Chipset
System Memory Memory Capacity
- Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
Memory Type
- DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
Memory Voltage
On-Board Devices SATA
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
IDE
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLP-B(+) R 3.00) **
- (Optional: AOC-SIMLP-3(+) R 3.00) ** with 3rd LAN support
- (Optional: AOC-SIM1U(+) R 3.00) ** for 1U
- RMM (Remote Management Module)
- (Card not included)
Network Controllers
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
Super I/O
Input / Output SATA
IDE
- Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
Floppy
LAN
USB
- 2 USB Rear Ports
- 4 USB Internal Headers
- 6 Total USB 2.0 Compliant, 1.1 Compatible
VGA
Keyboard / Mouse
- PS/2 keyboard and mouse ports
Serial Ports
- 1 Fast UART 16550 serial ports
- 1 Header
Parallel Port
- 1 ECP / EPP parallel port
Others
- 1 SATA DOM power connector
Chassis ( Optimized for H8SMi-2 ) Important Chassis Notes
- To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required]
Server(s) ( with H8SMi-2 ) Model(s)
Expansion Slots PCI-Express
- 1 x16 PCI-e slot
(nVidia SLI Technology Supported) - 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
PCI
- 3 PCI 32-bit, 33MHz slots
System BIOS BIOS Type
- 4Mb Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
Management Software
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
Power Configurations
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
PC Health Monitoring CPU
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
FAN
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
Temperature
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
LED
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
Other Features
- Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
Operating Environment / Compliance RoHS
- RoHS Compliant 6/6, Pb Free
Environmental Spec.
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart Regulatory FCC
- Passed to meet FCC standard requirement
Shipping :
Delivery time normally takes 2-7 business days in the USA depending what carrier you choose. International shipment will take upto 14 working days or longer. For international customer we do not cover any custom fees. It's your responsibilities for any fees associated with your purchase. We keep all the serial #s inhouse for verify returns. PLEASE READ CAREFULLY, DO NOT offer IF YOU DON'T AGREE WITH OUR TERMS! THANK YOU VERY MUCH!
Payment :
We accept PayPal. PayPal is preferred. Please pay within 3 days of sale closed. We ship to PayPal confirmed address only or your payment may have refunded. All sales are final. For Shipment and tracking # will be send within 24 hours of payment received. Thanks!
Click to EnlargeClick to EnlargeClick to EnlargeClick to EnlargeClick to Enlarge
inkfrog terapeak
inkFrog Analytics