Supermicro SYS-8047R-TRF+ Barebones Tower Server NEW IN STOCK 5 Year Warranty
Product SKUsSYS-8047R-TRF+
- SuperServer 8047R-TRF+ (Black)
Motherboard
Super X9QRi-F+Processor/CacheCPU
- Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core)
family (up to 130W CPU at 35°C) - Quad Socket R (LGA 2011)** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
Cache
System Bus
System MemoryMemory Capacity
- 32x 240-pin DDR3 DIMM slots
- Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM slots
Memory Type
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers
- Intel® i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
- Matrox G200eW (Nuvoton WPCM450 BMC)
Super I/O
Input / OutputSATA
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x dedicated LAN port for IPMI
USB
Video
Serial Port / Header
- 1 Fast UART 16550 serial port
System BIOSBIOS Type
- 16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
ChassisForm Factor
- Tower / 4U Rackmountable
- Optional Rackmount class="desc" style="font-weight: bold; margin-left: 0px; margin-bottom: 0px; padding-left: 0px; color: rgb(93, 139, 96) !important;">
- 18.2" (462mm)
Width
Depth
Weight
- Net Weight: 65.5 lbs (29.7 kg)
- Gross Weight: 86.0 lbs (39.0 kg)
Available Colors
Drive BaysHot-swap
- 5x 3.5" Hard Drive Bays
- Additional 5x 3.5" Drives available with optional M35 Mobile Rack
Peripheral Bay(s)
- 3x 5.25" Peripheral Drive Bays
Expansion SlotsPCI-Express
- 4x PCI-E 3.0 x16 (2 in x8) Slots
BackplaneSAS/SATA HDD Backplane
(SAS support requires optional SAS controller)System CoolingFans
- 3x 92mm RPM Hot-Swappable Cooling Fans
- 3x 80mm RPM Hot-Swappable Rear Exhaust Fan
Shrouds
Power SupplyRedundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2AC Voltage
- 100-240 V, 50-60 Hz, 15 Amp max
+12V
- 100 Amp/115 Vac
- 117 Amp/230 Vac
With Power Distributor
- +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
Certification
Platinum CertifiedPC Health MonitoringCPU
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
- 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
Temperature
- Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
Other Features
- Chassis intrusion detection
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts List - (Items Included)Part NumberQtyDescriptionMotherboard / X9QRi-F+ Motherboard
CSE-748TQ-R1K43B 4U ChassisBackplaneCSE-SAS-M35TQ1M35 SAS BACKPLANE W/AMI MG9072Cable 1CBL-0044L557.5CM SATA FLAT S-S PBFCable 2CBL-0157L-0128PIN TO 8PIN CABLE FOR SGPIO,615MM,PBFHeatsink / RetentionSNK-P0048PS42U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBAir ShroudMCP-310-74805-0B1Mylar air shroud for SC748 (X9QRi/7-TF+)
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.