Supermicro SYS-F617R2-R72+ 8-Node Barebones Server NEW IN STOCK 5 Year Warranty
Product SKUsSYS-F617R2-R72+
- SuperServer F617R2-R72+ (Black)
Motherboard
Super X9DRFRProcessor/CacheCPU
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
andE5-2600 v2family†
(up to 130W TDP)
* Please contact your Supermicro sales representative for additional detailsNote† BIOS version 3.0 or above is requiredCache
System Bus
System Memory (per node)Memory Capacity
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
DIMM Sizes
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
AHCI SATA
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
SCU SATA
- SATA 2.0 3Gbps with RAID 0, 1, 10
SAS
- SAS2 via Broadcom 2208
- HW RAID 0, 1, 5, 6, 10, 50 support
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Input / Output (per node)AHCI SATA
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
SCU SATA
- 2x SATA 2.0 ports (3Gbps)
SAS
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
VGA
Serial Port / Header
ChassisForm Factor
Model
Height
Depth
Package
- 28.3\" (W) x 15.0\" (H) x 42.4\" (D)
Weight
- Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power fail LED
Expansion Slots (per node)PCI-Express
- 1x PCI-E 3.0 x16 Low-profile
- 1x PCI-E 3.0 x8 (Micro LP)
- MicroLP Adapter Matrix(Networking options)
Drive Bays (per node)Hot-swap
- 6x Hot-swap 2.5\" SAS2/SATA HDD trays
Backplane1x SAS2 / SATA backplaneSystem Cooling (per node)Fans
- 3x 4cm 14k RPM middle fans
Power Supply1620W high-efficiency redundant power supply w/ PMBusAC Input
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
Certification Platinum Certified
[Test Report]System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts List - (Items Included)Part NumberQtyDescriptionMotherboard / X9DRFR Motherboard
4U Power Distribution Board for FAT Fat Twin 6Gbps hot swappable HDD backplane (W/O SGPIO), support up to 6x 2.5-inch SAS/SATA HDDCable 1CBL-0047L8FRONT CABLE 20 PIN TO 20 PIN, PB FREECable 2CBL-0118L-038Ipass To 4 SATA Cable, 30AWG, 29/29/27/27 CM, W/ 27CM SB, SCable 3CBL-0157L-02827cm SGPIO CableCable 4CBL-0226L1643CM SATA ROUND S-RA PBFCable 5CBL-0480L84Pin to 4Pin Power Cable L=40cmRiser CardRSC-R1UF-E16R8RSC-R1UF-E16RHeatsink / RetentionSNK-P0047PF81U Passive Rear CPU Heat Sink for 1U Node Rear I/O Fat Twin ServersHeatsink / RetentionSNK-P0047PSM81U Passive Front CPU Heat Sink w/ a Middle Air Channel for X9, X10 2U Twin^2+ and Twin Pro^2 Series ServersMounting RailMCP-290-41803-0N1Fat twin F418 / F424 Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in\'s of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.