UBB Store

Supermicro SuperChassis CSE-848 X9QRI-F+ 24x 3.5" SAS Bay 4U CTO Storage Server For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Supermicro SuperChassis CSE-848 X9QRI-F+ 24x 3.5" SAS Bay 4U CTO Storage Server

Price: GB $1667.49

Supermicro SuperChassis CSE-848 X9QRI-F+ 24x 3.5" SAS Bay 4U CTO Storage Server

Chassis Part number:SuperChassisCSE-848

Motherboard Part number:X9QRI-F+

In Good Condition, Full Working Order

CTO (Configure To Order)

PLEASE NOTE THAT THIS IS A CTO (Configure to Order) SERVER AND NO CPU, NO MEMORY (BOTH REQUIRED IN ORDER TO OPERATE) AND NO HDD ARE INCLUDED. WE CAN QUOTE TO SUPPLY THESE OR YOU CAN INSTALL YOUR OWN

Includes:

1 x Supermicro SuperServer CSE-848

Motherboard - X9QRI-F+

Quad Socket R (LGA 2011) - Supports Intel Xeon processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family
32x 240-pin DDR3 DIMM slots

24-Bay 3.5" SAS/SATA Hard Drive Bays - Backplane BPN-SAS2-846EL1
2 x 1620W Power Supplies - PWS-1K62P-1R

Manufacturer Motherboard Specification:
MBD-X9QRi-F+ -B

X9QRi-F+ (Bulk Pack)

Physical StatsForm Factor

16.4" x 16.79" (41.66cm x 42.65cm)

Processor/CacheCPU

Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core)
family
Quad Socket R (LGA 2011)** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.

Cache

Up to 30MB

System Bus

QPI up to 8 GT/s

System MemoryMemory Capacity

32x 240-pin DDR3 DIMM slots
Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM slots

Memory Type

1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

32GB, 16GB, 8GB, 4GB, 2GB, 1GB

Memory Voltage

1.5 V, 1.35 V

Error Detection

Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board DevicesChipset

Intel® C602 chipset

SATA

SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10

IPMI

Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC

Network Controllers

Intel® i350 Dual port GbE LAN
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201F PHY (dedicated IPMI)

Video

G200 (Nuvoton WPCM450 BMC with graphic controller)

Super I/O

Nuvoton W83527HG

Input / OutputSATA

2x SATA 3.0 ports (6Gb/s)
4x SATA 2.0 ports (3Gb/s)

LAN

2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port

USB

8x USB 2.0 ports total
(4 rear + 3 front + 1 Type A)

Video

1x VGA port

Serial Port / Header

2x Fast UART 16550 ports: 1 rear and 1 header

DOM

1 DOM (Disk on Module) power connector

Chassis (Optimized for X9QRi-F+ )1U Chassis

CSE-818A-1K43LPB
(rev. M required, Air Shroud MCP-310-81809-0B)

2U Chassis

CSE-828TQ-R1K43LPB
(rev. M required, Air Shroud MCP-310-82805-0B)

Tower / 4U Rackmount

CSE-418E16-R1K62B
CSE-418E16-R1K62B2
CSE-748TQ-R1K43B
CSE-848E16-R1K62B
(for SC748, rev. M required, Air Shroud MCP-310-74805-0B)
(for SC848 & 418, rev. M required, Air Shroud MCP-310-84803-0B)

Important Chassis Notes

To support the new generation Intel® Xeon® processor-based motherboards,Revision Mchassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X9QRi-F+Model(s)