 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Supermicro X10DRD-L Motherboard E-ATX with 2 Xeon E5-2630V3 (LGA 2011)Only Heatsinks and 2X Intel Xeon E5-2630V3 with the Motherboard are included.ADDITIONAL ACCESSORIES NOT INCLUDED Specification:Form Factor - 13.05" x 10.5" (33.15cm x class="desc">
- Intel Xeon processor E5-2600 v3, Intel Xeon processor E5-2600 v4.
- Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W, 1 QPI up to 9.6GT/s
Cores / Cache - Up to 22 cores † / Up to 55MB† cache
Note - † BIOS version 2.0 or above is required
Note - ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory Memory Capacity - Up to 512GB Registered ECC RDIMM, DDR4-2400MHz; Up to 1TB 3DS ECC/non-ECC LRDIMM, in 8 DIMM slots
Memory Type - 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes - RDIMM: 4GB, 8GB, 16GB, 32GB
- LRDIMM: 32GB, 64GB
- 3DS LRDIMM: 128GB
Memory Voltage Error Detection - Corrects single-bit errors
On-Board Devices Chipset SATA - Intel C612 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
AHCI SATA - SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers - Dual LAN with Intel i350 Gigabit Ethernet Controller
Single LAN with Virtual Machine Device Queues reduce I/O overhead
Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics Input / Output SATA LAN - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB - 7 USB 2.0 ports (4 rear + 2 headers + 1 Type A)
Video Output Serial Port / Header - 2 COM Ports (1 rear, 1 header)
TPM Expansion Slots PCI-E System BIOS BIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI class="desc">
- Intel Node Manager, IPMI2.0, NMI, SuperDoctor® 5, Watchdog
Power Configurations - ACPI Power Management
- Power-on mode for AC power recovery
PC Health Monitoring Voltage - +12V, +3.3V, +5V, +5V standby, 3.3V standby, 4 Phase-switching voltage regulator
FAN - 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature - Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI
LED - CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
Other Features - 5% - 95% (non-condensing)
Operating Environment Operating Temperature Range - 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range - -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range - 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range Product SKUs MBD-X10DRD-L  |
|
