About chip serial number
There are 5 sets of chip serial numbers. If they are not recognized, simply remove the chip and reinstall it.
UltraChrome DS Sublimation Ink Bags for F6300,F9400,F9400H,F9460 Printers
Dye-sublimation CMYK ink technology produces extreme color gamut with vibrant colors, intense blacks, sharp contours, and smooth gradations; provides extremely fast drying times, and with the new ink refill packs, offers a low total cost of ownership.
Product Instruction
Product Name : Dye-Sublimation Ink Pack,Sublimation Ink PackCartridge Model : T46D8 T46D1 T46D2 T46D3 T46D4OEM Part Number :
C13T46D840 - High Density Black
C13T46D140 - Black
C13T46D240 - Cyan
C13T46D340 - Magenta
C13T46D440 - YellowCartridge Color : HDK / BK / C / M / YChip Capacity : 1100ML/PackInk Type : Full With Sublimation InkChip Type : The ink packs will send with one time use chipsCondition : Plug and Play,same as original inkWarranty : 1:1 Replace Any Defective
Compatible Printers
For Epson SureColor SC-F6300 (nK)For Epson SureColor SC-F6300 (hdK)For Epson SureColor SC-F6360For Epson SureColor SC-F9400For Epson SureColor SC-F9400HFor Epson SureColor SC-F9460
About INK BAG
This is new upgrade cartridge chip,the chip belongs to high quality disposable chip.One pack of ink pack will send
How to Replace Ink Tank Chip
If the message Chip unit expended is displayed on the control panel, this means that the chip needs to be replaced soon.
You will be unable to print if the chip unit for even one color needs to be replaced. Please follow these steps:1.Open the ink tank cover. Insert a finger into the groove on the top of the slider and pull straight outward.
2.Remove the chip unit from the slider.
Important: Do not tilt the slider. If the chip unit is dropped it may break.
3.Install the new chip unit.
4.Attach the chip unit (chip has been replaced) to the slider. Hold the slider level horizontally and insert it. Close the ink tank cover.Done.
How to Refill Ink to Ink Tank
Note the following points when refilling ink:
a.Gently cut or tear off the ink pack spout opening.
b.If you cut the ink pack spout too quickly, ink may splatter.
c.Do not squeeze open ink packs. Ink may spill.1.Open the slider ink inlet cover,and remove the ink inlet cap from the ink tank.
2.Cut or tear off the ink pack spout seal.
3.Fill the ink tank with the ink from ink pack.Insert the spout of the ink pack into the groove and slowly tilt it to pour out the ink.
4.Put the ink inlet cap back on the ink tank,and close the slider ink inlet cover.
