The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165?C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed. Heating element for warming the CPU Designed for the Intel 1851 Delid-Die-Mate V1 Follow the warning instructions! Scope of Delivery: 1x Intel 1851 Delid-Die-Mate Heater V1 1x Angle wrench 1x TG Cleaning Wipes 1x Kryonaut, 1g Warning Instructions: Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165?C (the melting point of indium is 157?C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.