Tiertime 3D Printing Filament Dryer Pro offers an easy and quick way to remove moisture from filaments for better quality of 3D printing. It works with both 1.75mm & 3mm diameter filaments of any filament material.
It has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in anyway.
Description
- DUAL FILAMENT COMPATIBILITY: Works with both 1.75mm and 3mm diameter filaments of any material type, providing versatile moisture removal for improved 3D printing quality
- DIGITAL CONTROL PANEL: Features an easy-to-read LED display with temperature and time controls, plus simple minus and plus buttons for precise adjustment of drying settings
- TRANSPARENT DESIGN: Clear housing allows you to monitor your filament spools during the drying process without interrupting the cycle
- SPACIOUS CAPACITY: Two-tier design accommodates multiple filament spools simultaneously, maximizing efficiency and saving valuable time between prints
- MOISTURE REMOVAL SYSTEM: Effectively eliminates moisture from 3D printing filaments to prevent print defects like bubbling, stringing, and layer adhesion issues
- ADJUSTABLE TEMPERATURE SETTINGS: Customizable temperature controls allow you to set the appropriate drying temperature for different filament materials including PLA, ABS, PETG, nylon, and specialty filaments
- TIMER FUNCTION: Built-in timer ensures precise drying cycles, allowing you to set the exact duration needed for optimal moisture removal from your filament spools
Actual filament drying time varies due to filament additives, initial water content level and ambient temperature & humidity. If a filament has been exposed in the air for weeks, very likely a lot of moisture has been absorbed and much longer drying time (double the regular drying time) is needed. In addition to drying the filament prior to 3D printing, drying the filament while printing is always recommended.
A comprehensive user manual is included in the package to guide you through setup and operation. Detailed instructions are also available for download upon request.
