Critical Node Protection: Engineered to keep low-power servers, Raspberry Pi clusters, NAS appliances, switches, and modems online through dirty grid power, voltage dips, and blackouts.

Power Output Capacity: Delivers up to 550VA / 300 Watts of standby backup power.

Input / Output Ratings: Standard 120V AC (60 Hz, 10A input) converting to 115V AC battery output; supports up to 1200W total passthrough capacity.

8-Receptacle Array:

• 4× Battery, Surge, and EMI/RFI Noise-Protected outlets for essential computing hardware

• 4× Surge and Noise-Protected outlets for auxiliary peripherals

Transient & Noise Suppression: Integrated toroidal line-filter choke and metal-oxide varistors (MOVs) to filter out line noise, spikes, and transients before they reach sensitive silicon.

Data Line Protection: Dual RJ jacks provide passthrough surge suppression to protect Ethernet, DSL, or telco hardware against line surges.

Local Diagnostics & Control: Push-button power switch, push-to-reset circuit breaker, green "ON/OFF" operational LED, and red "OVERLOAD / CHECK BATTERY" warning LED.

Communication Interface: Equipped with an external data signaling port for automated OS power management and shutdown communication via Eaton/Tripp Lite PowerAlert software.

Mounting Options: Dual rear keyhole slots allow easy wall, desk-underside, or rack-side mounting.

Mainboard Verified: Bench-tested with 12V DC input to ensure proper inverter oscillation, audible alert signals, and clean AC output under load.

No Battery Included: Shipped without a dead, heavy battery; you provide your own standard 12V sealed lead-acid (SLA) or compatible 12V LiFePO4 cell.

Plug-and-Play Internal Leads: Terminated with clean, heavy-duty spade disconnects for an easy, toolless battery swap.

1× Tripp Lite INTERNET550U 550VA UPS Chassis with integrated heavy-duty AC cord

1× Personalized, handwritten thank-you letter from a fellow tech enthusiast

Impact Buffer: Wrapped in multiple thick layers of high-density bubble wrap to cushion the chassis, receptacle face, and internal solder joints from mechanical shock and drop vibrations.

Surface & Puncture Armor: Over-wrapped in heavy-duty builder's paper to eliminate scuffs, prevent box abrasion, and shield corners from transit wear.

Cable Management: Main power cord coiled with proper bend radii and secured to eliminate terminal strain and plug damage.

The Personal Touch: Includes a personalized, handwritten thank-you letter safely placed inside with your gear.