Tripp Lite NPOE-30W-1G-INT PoE+ Injector Tripp Lite NPOE-30W-1G-INT PoE+ Injector
International Customers: All electronic products are packaged for sale in the US with US voltage.
Package Contents: NPOE-30W-1G-INT PoE+ Injector External Power Supply (Input: 100-240V, 50/60 Hz, 0.75A) 4 x International Plug Adapters (North America, Europe, U.K., Australia) Owner's Manual
Certifications & Standards: IEEE Standards Supported 802.3 IEEE Standards Supported 802.3ab IEEE Standards Supported 802.3af IEEE Standards Supported 802.3at IEEE Standards Supported 802.3 UL Listed FCC (USA)
Environmentally Friendly: Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Waste Electrical and Electronic Equipment Directive (WEEE)
Country of Origin: China
Product Description
This item is brand-new, factory sealed.
Tripp Lite 1-Port Gigabit PoE+ Midspan Active Injector 30W Power Over Ethernet, IEEE 802.3at/802.3af, International Plug Adapter for North America, EU, UK, Australia, 3-Year Warranty (NPOE-30W-1G-INT)
- SAVES YOU TIME AND MONEY: PoE+ injector delivers 10/100/1000 Mbps of data and 30W of power using existing Cat5e/6/6a cables. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.
- EXPANDS YOUR POE NETWORK UP TO 100 METERS: Belivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
- SIMPLE PLUG-AND-PLAY INSTALLATION HAS YOUR DEVICE CONNECTED IN MINUTES: No configuration or software is required to add to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the units C6 inlet to an outlet using the included power supply and international plug adapters. LEDs indicate the unit is receiving power and is ready to transmit data.
- DESIGNED FOR INSTALLATION ALMOST ANYWHERE: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or dcor. The fanless design is ideal for silent operation.
- RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 3-year limited manufacturer's warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.
- Brand: Tripp Lite
- Item model number: NPOE-30W-1G-INT
- Item Weight: 1.1 pounds
- Product Dimensions: 7 x 3.7 x 3.5 inches
- Item Dimensions LxWxH: 7 x 3.7 x 3.5 inches
- Manufacturer: TRIPP LITE
ADDS A POE DEVICE TO YOUR LAN WITHOUT ADDING A POE SWITCH: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. SAVES YOU TIME AND MONEY ON UNNECESSARY EQUIPMENT UPDATES: This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. EXPANDS YOUR POE NETWORK UP TO 100 METERS: The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads. SIMPLE PLUG-AND-PLAY INSTALLATION HAS YOUR DEVICE CONNECTED IN MINUTES: No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit's C6 inlet to an outlet using the included power supply and international plug adapters. LEDs indicate the unit is receiving power and is ready to transmit data. DESIGNED FOR INSTALLATION ALMOST ANYWHERE: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or decor. The fanless design is ideal for silent operation.
Package Contents:
- NPOE-30W-1G-INT PoE+ Injector
- External Power Supply (Input: 100-240V, 50/60 Hz, 0.75A)
- 4 x International Plug Adapters (North America, Europe, U.K., Australia)
- Owner's Manual
SpecificationPower DescriptionMaximum Output Voltage53 V DCInput Voltage
Maximum Input Current750 mAPhysical CharacteristicsForm FactorDesktopWeight (Approximate)8.80 ozProduct ColorBlackHeight1.4"Color Warranty3 YearInterfaces/PortsOutput PortsRJ-45Input PortsRJ-45General InformationBrand NameTripp Lite seriesMarketing Information PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch. Features | Adds a PoE Device to Your LAN Without Adding a PoE Switch Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expands Your PoE Network Up to 100 Meters The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads. Simple Plug-and-Play Installation Has Your Device Connected in Minutes No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit's C6 inlet to an outlet using the included power supply and international plug adapters. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. Product TypePoE+ InjectorProduct NameNPOE-30W-1G-INT PoE+ InjectorManufacturerEaton CorporationManufacturer Part NumberNPOE-30W-1G-INTProduct ModelNPOE-30W-1G-INTTitleProduct TitleEaton Tripp Lite Series Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords (NPOE30W1GINT)Technical InformationProtection Type
- Short Circuit
- Overload Protection
- Over Voltage
Shipping
Most orders placed prior to 11AM PST ship same business day
Some lightweight items ship Postal and can be shipped to a PO BOX. Most other orders will ship via UPS or FedEx. Please note we cannot ship UPS or FedEx to PO Box addresses.
Expedited orders will ship 2nd Day Air
Returns
This item is eligible for return within 30 days of delivery. Opened items must be in re-sellable condition including original packaging and all accessories.
Please visit our Returns Page for more information on Excluded Items, Damage Claims, and more details on requesting RA information.
[ Read our full policy ] About Beach Audio
Founded in August 2002, Beach Audio´s mission is to provide the best experience on the Internet for buying Consumer Electronics. We focus on making purchasing online a pleasant experience. We offer flat rate Ground shipping on all items less than 75 pounds that can be shipped via common carrier. Our sales office is located in beautiful town of Redondo Beach, California, just a few miles South of Los Angeles International Airport. We do not stock any inventory at our sales office. Instead, we ship from several warehouses located throughout the country. Our sophisticated fulfillment system will automatically ship from the warehouse location that is closest to your shipping address! Why are our prices so low? It´s simple. We have modeled our business much like a wholesaler. We sell in huge volume and have streamlined our operations to provide you with the best combination of price and service available anywhere.
Hours of Operation 8AM - 5PM PST MON - THU, 8AM - NOON PST FRIDAY
[ Read more ] Copyright© Beach Audio Inc, 2022
